Počet záznamů: 1  

Gearbox Mechanical Efficiency Determination by Strain Gauges Direct Application

  1. 1.
    0551823 - FGÚ 2022 RIV CH eng J - Článek v odborném periodiku
    Lopot, F. - Dub, M. - Flek, J. - Hadraba, Daniel - Havlíček, M. - Kučera, L. - Štoček, O. - Veselý, T. - Janáček, Jiří
    Gearbox Mechanical Efficiency Determination by Strain Gauges Direct Application.
    Applied Sciences-Basel. Roč. 11, č. 23 (2021), č. článku 11150. E-ISSN 2076-3417
    Grant CEP: GA MŠk(CZ) LM2018129
    Institucionální podpora: RVO:67985823
    Klíčová slova: strain-gauge * efficiency * notch * FEM * calibration
    Obor OECD: Medical laboratory technology (including laboratory samples analysis
    Impakt faktor: 2.679, rok: 2020
    Způsob publikování: Open access
    https://www.mdpi.com/2076-3417/11/23/11150

    This article describes a unique method of measuring the efficiency of gearboxes using foil strain gauges, which allows maintaining the current configuration of the gearbox within the overall assembly of the machine and its functional condition. The presented method is applicable to gearboxes located in the original equipment assembly without the need to use a test rig. Using foil strain gauges, the torque at the input and output of the gearbox is detected. Therefore, the accuracy of torque measurement is key. The crucial step is the calibration of the instrumentation to the given application conditions, which, in this case, is ensured by a virtual calibration using a very accurate FEM analysis. The accuracy of the position of strain gauges and virtual calibration of measurements generate inaccuracies affecting the resulting uncertainty of the determined efficiency. The present article shows, on the example of several measurements, that when using 24-bit converters, after processing the obtained data, mechanical stress with a sensitivity better than hundredths of an MPa can be reliably detected even without signal amplification from strain gauges. It follows that the efficiency is determined with an accuracy of better than low units of tenths.
    Trvalý link: http://hdl.handle.net/11104/0327138

     
     
Počet záznamů: 1