Počet záznamů: 1  

Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former

  1. 1.
    0443923 - UFP-V 2016 RIV US eng J - Článek v odborném periodiku
    Medřický, J. - Curry, N. - Pala, Zdeněk - Vilémová, Monika - Chráska, Tomáš - Johansson, J. - Markocsan, N.
    Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former.
    Journal of Thermal Spray Technology. Roč. 24, č. 4 (2015), s. 622-628. ISSN 1059-9630
    Grant CEP: GA ČR GB14-36566G
    Institucionální podpora: RVO:61389021
    Klíčová slova: gas turbines * high temperature application * porosity of coatings * stabilized zirconia * thermal barrier coatings (TBCs)
    Kód oboru RIV: JH - Keramika, žáruvzdorné materiály a skla
    Impakt faktor: 1.568, rok: 2015

    Yttria-stabilized zirconia thermal barrier coatings are extensively used in turbine industry; however,increasing performance requirements have begun to make conventional air plasma sprayed coatings insufficient for future needs.Since the thermal conductivity of bulk material cannot be lowered easily; the design of highly porous coatings may be the most efficient way to achieve coatings with low thermal conductivity.Thus the approach of fabrication of coatings with a high porosity level based on plasma spraying of ceramic particles of dysprosia-stabilized zirconia mixed with polymer particles,has been tested.Both polymer and ceramic particles melt in plasma and after impact onto a substrate they form a coating.When the coating is subjected to heat treatment, polymer burns out and a complex structure of pores and cracks is formed.In order to obtain desired porosity level and microstructural features in coatings; a design of experiments, based on changes in spray distance,powder
    Trvalý link: http://hdl.handle.net/11104/0246554