Počet záznamů: 1
Tensile properties of open cell ceramic foams
- 1.0399353 - ÚFM 2014 RIV SK eng J - Článek v odborném periodiku
Bertolla, Luca - Dlouhý, Ivo - Řehořek, Lukáš - Chlup, Zdeněk
Tensile properties of open cell ceramic foams.
Acta metallurgica slovaca - Conference. Roč. 3, č. 1 (2013), s. 106-113. ISSN 1338-1660.
[FRACTOGRAPHY 2012. Stará Lesná, 21.10.2012-24.10.2012]
Grant CEP: GA ČR(CZ) GA101/09/1821
GRANT EU: European Commission(XE) 264526 - GLACERCO
Institucionální podpora: RVO:68081723
Klíčová slova: tension test * cellular materials * ceramics
Kód oboru RIV: JH - Keramika, žáruvzdorné materiály a skla
Full understanding of response of highly porous (cellular) ceramic foams to different mechanical loading conditions is important because of their potential use in industry, medical and other applications. A new technique for testing tensile strength of ceramic foam materials has been developed and first knowledge is described in the paper. Testing procedure consists of fixation of ceramic foam into aluminium pots by suitable adhesive. Alumina based ceramic foam material produced by Lanik (CZ) was used for the test methodology development. Samples were produced by polyurethane foam replication technique. Foams having 10 and 60 pores per linear inch (PPI) were tested. Basic fractographic analysis was carried out by scanning electron microscopy (SEM) to get corresponding figure about specimen behaviour during tensile loading. Influence of increasing PPI (decreasing cell size) on tensile strength of specimens was experimentally proven. With increasing PPI the tensile strength decreases.
Trvalý link: http://hdl.handle.net/11104/0227426
Počet záznamů: 1