Počet záznamů: 1

Numerical Investigation of Hybrid-Stabilized Argon-Water Electric Arc Used for Biomass Gasification

  1. 1.
    0363331 - UFP-V 2012 RIV HR eng M - Část monografie knihy
    Jeništa, Jiří - Takana, H. - Nishiyama, H. - Bartlová, M. - Aubrecht, V. - Křenek, Petr - Hrabovský, Milan - Kavka, Tetyana - Sember, Viktor - Mašláni, Alan
    Numerical Investigation of Hybrid-Stabilized Argon-Water Electric Arc Used for Biomass Gasification.
    Progress in Biomass and Bioenergy Production. Rijeka: InTech, 2011 - (Shahid Shaukat, S.), s. 63-88. ISBN 978-953-307-491-7
    Grant CEP: GA ČR GAP205/11/2070; GA AV ČR KJB100430901
    Výzkumný záměr: CEZ:AV0Z20430508
    Klíčová slova: hybrid-stabilized electric arc * mass flow rate * net emission coefficients * partial characteristics * Mach number * shock diamonds
    Kód oboru RIV: BL - Fyzika plazmatu a výboje v plynech
    http://www.intechopen.com/source/pdfs/16639/InTech-Numerical_investigation_of_hybrid_stabilized_argon_water_electric_arc_used_for_biomass_gasification.pdf http://www.intechopen.com/source/pdfs/16639/InTech-Numerical_investigation_of_hybrid_stabilized_argon_water_electric_arc_used_for_biomass_gasification.pdf

    This paper presents numerical investigation of characteristics and processes in the worldwide unique type of thermal plasma generator with combined stabilization of arc by argon flow and water vortex, the so-called hybrid-stabilized arc. The arc has been used for spraying of ceramic or metallic particles and for pyrolysis of biomass. The net emission coefficients as well as the partial characteristics methods for radiation losses from the argon-water arc are employed. Calculations for 300-600 A with 22.5-40 standard liters per minute (slm) of argon reveal transition from a transonic plasma flow for 400 A to a supersonic one for 600 A with the maximum Mach number of 1.6 near the exit nozzle of the plasma torch. Comparison with available experimental data near the exit nozzle proved very good agreement for the radial temperature profiles. Radial velocity profiles calculated 2 mm downstream of the nozzle exit show good agreement with the profiles determined from the combination
    Trvalý link: http://hdl.handle.net/11104/0199292