Počet záznamů: 1

Monitoring of material surface polishing procedure using confocal microscope

  1. 1.
    0361137 - UTAM-F 2012 RIV CZ eng J - Článek v odborném periodiku
    Dudíková, M. - Kytýř, Daniel - Doktor, Tomáš - Jiroušek, Ondřej
    Monitoring of material surface polishing procedure using confocal microscope.
    Chemické listy. Roč. 105, č. 17 (2011), s. 790-791 ISSN 0009-2770
    Grant CEP: GA ČR(CZ) GAP105/10/2305
    Výzkumný záměr: CEZ:AV0Z20710524
    Klíčová slova: confocal microscope * roughness reduction * sample preparation * surface roughness criteria
    Kód oboru RIV: JJ - Ostatní materiály
    Impakt faktor: 0.529, rok: 2011
    http://www.chemicke-listy.cz/common/content-issue_17-volume_105-year_2011.html

    Article deals with monitoring and optimization of roughness reduction procedure used for preparation of samples for nanoindentation tests. The aim of the research was to measure roughness reduction effect of various combination of grindstones, polishing time, pressure and speed. Suitable procedure with respect to time and cost for three different materials was proposed. For porous materials trabecular bone was chosen, fibre composite as and asbestos-free plates compact ones. Roughness measurement was performed by contactless method using a confocal microscope. Number of grinding steps was reduced and optimal forces and times of grinding were estimated.
    Trvalý link: http://hdl.handle.net/11104/0198531