Počet záznamů: 1

Electromechanical sensors based on carbon nanotube networks and their polymer composites

  1. 1.
    0359749 - UH-J 2012 RIV DE eng M - Část monografie knihy
    Slobodian, P. - Říha, Pavel - Olejník, R.
    Electromechanical sensors based on carbon nanotube networks and their polymer composites.
    New Developments and Applications in Sensing Technology. 1. Berlin: Springer, 2011 - (Mukhopadhyay, S.; Lay-Ekuakille, A.; Fuchs, A.), s. 233-251. Lecture Notes in Electrical Engineering, 83. ISBN 978-3-642-17942-6
    Grant CEP: GA AV ČR IAA200600803
    Grant ostatní: Interní grantová agentura UTB(CZ) IGA/12/FT/10/D
    Výzkumný záměr: CEZ:AV0Z20600510
    Klíčová slova: carbon nanotube network * compression * electrical conductivity * stress sensor * gas sensor
    Kód oboru RIV: JB - Senzory, čidla, měření a regulace

    A network of entangled multiwall carbon nanotubes and the composite consisting of polystyrene filter-supported multiwall carbon nanotube network are conductors whose conductivity is sensitive to compressive stress both in the course of monotonic stress growth and when loading/unloading cycles are imposed. The testing has shown as much as 100% network conductivity increase at the maximum applied stress. The filter-support increases nanotube network mechanical integrity, the composite tensile ultimate strength and affects favorably the composite electrical resistance. Other obvious effect of the supporting polymer is reduction of the resistance temperature dependence. Moreover, the conductivity of carbon nanotube networks manifests also organic vapor dependence. The dependence is reversible, reproducible and selective as well as influenced by nanotube oxidation.
    Trvalý link: http://hdl.handle.net/11104/0197471
    Název souboruStaženoVelikostKomentářVerzePřístup
    Slobodian_Říha_Olejník_Electromechanical sensors based on carbon nanotubes_2011.pdf01.8 MBVydavatelský postprintvyžádat