Výsledky vyhledávání
- 1.0534084 - ÚFM 2021 RIV CH eng J - Článek v odborném periodiku
Bürger, D. - Dlouhý, Antonín - Yoshimi, K. - Eggeler, G.
On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 795, SEP (2020), č. článku 139961. ISSN 0921-5093. E-ISSN 1873-4936
Grant CEP: GA MŠMT(CZ) EF16_025/0007304
Institucionální podpora: RVO:68081723
Klíčová slova: steady-state creep * electron-microscopy * power-law * microstructure * deformation * anisotropy * reduction * metals * faults * Ni-base superalloy single crystals * Shear creep deformation * Low-temperature high-stress creep * Stress exponent * Activation energy * Dislocation mechanisms
Obor OECD: Materials engineering
Impakt faktor: 5.234, rok: 2020
Způsob publikování: Open access
https://www.sciencedirect.com/science/article/pii/S0921509320310339?via%3Dihub
Trvalý link: http://hdl.handle.net/11104/0312303 - 2.0524011 - ÚFM 2021 RIV CH eng J - Článek v odborném periodiku
Dobeš, Ferdinand - Dymáček, Petr - Friák, Martin
Creep of Heusler-Type Alloy Fe-25Al-25Co.
Crystals. Roč. 10, č. 1 (2020), č. článku 52. ISSN 2073-4352. E-ISSN 2073-4352
Grant CEP: GA ČR(CZ) GA17-22139S
Institucionální podpora: RVO:68081723
Klíčová slova: appropriate diffusion-coefficients * fe-al * mechanical-properties * deformation-behavior * intermetallic phases * single-phase * iron * temperature * fe3al * resistance * iron aluminides * Heusler alloy * creep * stress exponent * activation energy
Obor OECD: Materials engineering
Impakt faktor: 2.589, rok: 2020
Způsob publikování: Open access
https://www.mdpi.com/2073-4352/10/1/52
Trvalý link: http://hdl.handle.net/11104/0309685 - 3.0509539 - ÚFM 2020 RIV CH eng J - Článek v odborném periodiku
Dobeš, Ferdinand - Dymáček, Petr - Friák, Martin
The Influence of Niobium Additions on Creep Resistance of Fe-27 at. % Al Alloys.
Metals. Roč. 9, AUG (2019), č. článku 739. E-ISSN 2075-4701
Grant CEP: GA ČR(CZ) GA17-22139S; GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: iron aluminides * stress exponent * activation energy * creep
Obor OECD: Pure mathematics
Impakt faktor: 2.117, rok: 2019
Způsob publikování: Open access
https://www.mdpi.com/2075-4701/9/7/739/htm
Trvalý link: http://hdl.handle.net/11104/0300304 - 4.0450057 - ÚFM 2016 RIV US eng J - Článek v odborném periodiku
Blum, W. - Dvořák, Jiří - Král, Petr - Eisenlohr, P. - Sklenička, V.
Correct Interpretation of Creep Rates: A Case Study of Cu.
Journal of Materials Science & Technology. Roč. 31, č. 11 (2015), s. 1065-1068. ISSN 1005-0302
Grant CEP: GA MŠMT(CZ) ED1.1.00/02.0068
Institucionální podpora: RVO:68081723
Klíčová slova: Cu * Creep * Minimum creep rate * Activation energy * Stress exponent
Kód oboru RIV: JJ - Ostatní materiály
Impakt faktor: 2.267, rok: 2015
Trvalý link: http://hdl.handle.net/11104/0251492 - 5.0444797 - ÚFM 2016 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Luptáková, Natália - Ballóková, B. - Dymáček, Petr
Compressive creep testing of MoSi2-SiC nanocomposites.
Materiály a technologie ve výrobě speciální techniky. Brno: Univerzita obrany, 2015, s. 86-89. ISBN 978-80-7231-999-2.
[ICMT 2015, Materiály a technologie ve výrobě speciální techniky /13./. Brno (CZ), 20.05.2015]
Grant CEP: GA MŠMT(CZ) ED1.1.00/02.0068
Institucionální podpora: RVO:68081723
Klíčová slova: MoSi2-SiC * creep test * compressive creep * stress exponent * activation energy
Kód oboru RIV: JG - Hutnictví, kovové materiály
Trvalý link: http://hdl.handle.net/11104/0249279 - 6.0362906 - ÚFM 2012 RIV DE eng C - Konferenční příspěvek (zahraniční konf.)
Kloc, Luboš - Spindler, M. - Sklenička, Václav
Creep of Ex-service AISI-316H Steel at Very Low Strain Rates.
Materials for Advanced Power Engineering 2010. Liege: Forschungszentrum Jülich GmbH, 2010 - (Lecomte-Beckers, J.; Contrepois, Q.; Beck, T.; Kuhn, B.), s. 142-149. ISBN 978-3-89336-685-9. ISSN 1866-1793.
[Materials for advanced power engineering 2010 /9./. Liege (BE), 27.09.2010-29.09.2010]
Grant CEP: GA AV ČR IAA200410701
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: low stress creep * primary creep * stress exponent * creep resistant steel
Kód oboru RIV: JG - Hutnictví, kovové materiály
Trvalý link: http://hdl.handle.net/11104/0199079 - 7.0083037 - ÚFM 2007 RIV DE eng C - Konferenční příspěvek (zahraniční konf.)
Kloc, Luboš - Sklenička, Václav
Creep of 0.5CrMoV Steel at Very Low Strain Rates.
[Creep 0.5CrMoV oceli při velmi nízkých rychlostech deformace.]
Materials for Advanced Power Engineering 2006. Juelich: Forschungszentrum Juelich, 2006 - (Lecomte-Becker, J.; Carton, M.; Schubert, F.; Ennis, P.), s. 1011-1017. Energy Technology, 53. ISBN 3-89336-436-6. ISSN 1433-5522.
[Materials for Advanced Power Engineering 2006. Liege (BE), 18.09.2006-20.09.2006]
Grant CEP: GA MŠMT 1P05OC006
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: low stress creep * primary creep * stress exponent
Kód oboru RIV: JG - Hutnictví, kovové materiály
Trvalý link: http://hdl.handle.net/11104/0146417 - 8.0024356 - ÚFM 2006 RIV CH eng J - Článek v odborném periodiku
Kloc, Luboš - Fiala, J.
Harper-Dorn creep in metals at intermediate temperatures revisited: constant structure test of pure Al.
[Návrat k Haper-Dornovu creepu v kovech při středních teplotách: test čistého hliníku s konstantní strukturou.]
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. 410-411, - (2005), s. 38-41. ISSN 0921-5093. E-ISSN 1873-4936.
[TMS 2005 annual meeting - The Langdon Symposium: Flow and forming of Crystalline Materials. San Francisco, 14.02.2005-17.02.2005]
Grant CEP: GA AV ČR(CZ) IAA2041101
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: HarperľDorn creep * Pure aluminum * Stress exponent
Kód oboru RIV: JG - Hutnictví, kovové materiály
Impakt faktor: 1.347, rok: 2005
http://www.sciencedirect.com/science?_ob=MImg&_imagekey=B6TXD-4H7TD0T-3-1B&_cdi=5588&_user=625109&_orig=browse&_coverDate=11%2F25%2F2005&_sk=995899999&view=c&wchp=dGLbVtb-zSkWA&md5=e8e6086ab059fd94dbc3bda45a8c47db&ie=/sdarticle.pdf
Trvalý link: http://hdl.handle.net/11104/0114920