Výsledky vyhledávání
- 1.0585446 - ÚCHP 2025 AE eng A - Abstrakt
Topka, Pavel - Jirátová, Květa - Čada, Martin - Naiko, Iryna - Ostapenko, Alina - Balabánová, Jana - Koštejn, Martin - Maixner, J. - Hubička, Zdeněk - Kovanda, F.
Plasma Jet Sputtering as an Efficient Tool for the Preparation of Transition Metal Oxide Catalysts Supported on Stainless Steel Meshes.
Conferences' Program. SAE: Setcor Media, 2024. ISBN N.
[SICT 2024, PLASMA TECH 2024 AND TRIBOLOGY 2024 JOINT INTERNATIONAL CONFERENCES. 17.04.2024-19.04.2024, Vienna]
Grant CEP: GA ČR(CZ) GA21-04477S
Institucionální podpora: RVO:67985858 ; RVO:68378271
Klíčová slova: low-temperature plasma jet sputtering * transi-tione metal oxides * stainless steel meshes
Obor OECD: Chemical process engineering; Fluids and plasma physics (including surface physics) (FZU-D)
https://setcor.org/userfiles/files/2024/Vienna/SICT-PlasmaTech-Tribology-2024-Joint-Conferences-Program.pdf
Trvalý link: https://hdl.handle.net/11104/0353154Název souboru Staženo Velikost Komentář Verze Přístup SICT_24.docx 3 480.4 KB Autorský postprint povolen - 2.0585386 - ÚFM 2025 RIV CH eng J - Článek v odborném periodiku
Yarasu, V. - Jurči, P. - Ptačinová, J. - Dlouhý, Ivo - Horník, J.
Effect of Cryogenic Treatments on Hardness, Fracture Toughness, and Wear Properties of Vanadis 6 Tool Steel.
Materials. Roč. 17, č. 7 (2024), č. článku 1688. E-ISSN 1996-1944
Institucionální podpora: RVO:68081723
Klíčová slova: dry sliding wear * tribological behavior * resistance * microstructure * enhancement * time * cryogenic treatment * cold-work tool steel * hardness * fracture toughness * tribological properties * wear mechanisms
Obor OECD: Materials engineering
Impakt faktor: 3.4, rok: 2022
Způsob publikování: Open access
https://www.mdpi.com/1996-1944/17/7/1688
Trvalý link: https://hdl.handle.net/11104/0353121 - 3.0584746 - ÚFM 2025 RIV US eng J - Článek v odborném periodiku
Babinský, Tomáš - Poczklán, Ladislav - Gálíková, Markéta - Polák, Jaroslav
Importance of γ′shearing in low-cycle fatigue of a wrought superalloy.
Fatigue and Fracture of Engineering Materials and Structures. early access (2024). ISSN 8756-758X. E-ISSN 1460-2695
Institucionální podpora: RVO:68081723
Klíčová slova: high-temperature * hysteresis loop * room-temperature * behavior * mechanisms * damage * oxidation * fracture * steel * cyclic plasticity * gamma prime shearing * low-cycle fatigue * persistent slip band * Rene 41
Impakt faktor: 3.7, rok: 2022
Způsob publikování: Omezený přístup
https://onlinelibrary.wiley.com/doi/10.1111/ffe.14272
Trvalý link: https://hdl.handle.net/11104/0352726 - 4.0583596 - ÚFM 2025 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Domski, J. - Gancarz, M. - Benešová, A. - Šimonová, H. - Seitl, Stanislav - Frantík, P. - Keršner, Z.
Effect of tire cords, steel and polypropylene fiber content on the fatigue response of cement-based mortars.
Advances in Science and Technology. Vol. 145. Zurich: Trans Tech Publications Ltd, Switzerland, 2024, s. 77-86. ISSN 1662-0356.
[NTCC 2023 - International Conference Non-Traditional Cement & Concrete /7./. Brno (CZ), 25.06.2023-28.06.2023]
Grant CEP: GA ČR GA21-08772S; GA MŠMT(CZ) 8J22AT008
Institucionální podpora: RVO:68081723
Klíčová slova: Cement-based composite * fiber * tire cord * steel * polypropylene * compressive test
Obor OECD: Civil engineering
Trvalý link: https://hdl.handle.net/11104/0352711 - 5.0583215 - ÚPT 2024 RIV CZ cze C - Konferenční příspěvek (zahraniční konf.)
Mrňa, Libor - Šebestová, Hana - Horník, Petr - Novotný, Jan
Hybridní svařování laser-MIG ocelí pro energetiku.
[Hybrid laser-MIG welding of steels for the energy industry.]
Technická konference 2023. Certifikace a inspekce pro posuzování shody, bezpečnost, životnost a spolehlivost výrobků a technických zařízení. Brno: TESYDO, 2023, č. článku 008. ISBN 978-80-87102-38-1.
[Technická konference 2023. Brno (CZ), 18.09.2023-19.09.2023]
Institucionální podpora: RVO:68081731
Klíčová slova: laser welding * hybrid welding * creep-resistant steel * weld metal * chemical homogeneity
Obor OECD: Mechanical engineering
Trvalý link: https://hdl.handle.net/11104/0351217 - 6.0583138 - ÚFM 2025 RIV CH eng J - Článek v odborném periodiku
Jurči, P. - Dlouhý, Ivo
Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance.
Materials. Roč. 17, č. 3 (2024), č. článku 548. E-ISSN 1996-1944
Grant CEP: GA MŠMT(CZ) EF16_025/0007304
Institucionální podpora: RVO:68081723
Klíčová slova: 1.2080 tool steel * hot die steel * dry sliding wear * high-speed steel * iron-carbon martensite * chromium cast irons * aisi d2 steel * heat-treatment * retained austenite * vanadis 6 * steels * martensite * retained austenite * cryogenic treatment * carbides * microstructure * mechanical properties * wear performance * corrosion performance
Obor OECD: Materials engineering
Impakt faktor: 3.4, rok: 2022
Způsob publikování: Open access
https://www.mdpi.com/1996-1944/17/3/548
Trvalý link: https://hdl.handle.net/11104/0352698 - 7.0583056 - ÚPT 2025 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Šebestová, Hana - Horník, Petr - Mika, Filip - Mikmeková, Šárka - Ambrož, Ondřej - Mrňa, Libor
Microstructure modifications of Al-Si-coated press-hardened steel 22MnB5 by laser welding.
METAL 2023. 32nd International Conference on Metallurgy and Materials. Conference Proceedings. Ostrava: TANGER, 2024, s. 302-307. ISBN 978-80-88365-12-9. ISSN 2694-9296.
[METAL 2023. International Conference on Metallurgy and Materials /32./. Brno (CZ), 17.05.2023-19.05.2023]
Grant CEP: GA TA ČR(CZ) FW01010293
Grant ostatní: AV ČR(CZ) StrategieAV21/17
Program: StrategieAV
Institucionální podpora: RVO:68081731
Klíčová slova: laser welding * high-strength steel * microstructure * heat input * ferrite stabilization
Obor OECD: Mechanical engineering
https://www.confer.cz/metal/2023/4646-microstructure-modifications-of-al-si-coated-press-hardened-steel-22mnb5-by-laser-welding
Trvalý link: https://hdl.handle.net/11104/0351050 - 8.0582301 - ÚFM 2025 RIV SG eng J - Článek v odborném periodiku
Kocich, R. - Kunčická, Lenka - Benc, M. - Weiser, Adam - Németh, Gergely
Corrosion behavior of selective laser melting- manufactured bio-applicable 316L stainless steel in ionized simulated body fluid.
International Journal of Bioprinting. Roč. 10, č. 1 (2024), s. 339-356. ISSN 2424-7723. E-ISSN 2424-8002
Grant CEP: GA MŠMT LM2023057
Výzkumná infrastruktura: CICRR - 90241
Institucionální podpora: RVO:68081723 ; RVO:61389005
Klíčová slova: pitting corrosion * mechanical-properties * heat-treatment * residual-stress * nuclear-fusion * microstructure * technology * texture * metals * design * Additive manufacturing * Rotary swaging * 316L stainless steel * Electro-chemical corrosion * Microstructure * Residual stress
Obor OECD: Materials engineering; Materials engineering (UJF-V)
Impakt faktor: 8.4, rok: 2022
Způsob publikování: Open access
https://accscience.com/journal/IJB/10/1/10.36922/ijb.1416
Trvalý link: https://hdl.handle.net/11104/0352929 - 9.0581977 - ÚFP 2024 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Pokorný, P. - Janata, Marek - Brožek, Vlastimil
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel.
Proceedings of the 10th International Conference on Chemical Technology. Praha: Czech Society of Industrial Chemistry, 2023, s. 84-88. ISBN 978-80-88307-18-1.
[10th International Conference on Chemical Technology. Mikulov (CZ), 24.04.2023-26.04.2023]
Institucionální podpora: RVO:61389021
Klíčová slova: ceramic protection * 3-glycidyloxypropyl-triethoxysilane * steel
Obor OECD: Ceramics
https://www.icct.cz/cs/Amca-ICCT/media/content/2023/dokumenty/Proceedings_ICCT-2023.pdf
Trvalý link: https://hdl.handle.net/11104/0350113 - 10.0581787 - ÚPT 2024 RIV CZ cze Z - Poloprovoz, ověřená technologie, odrůda/plemeno
Mrňa, Libor - Šebestová, Hana - Novotný, Jan - Beran, D. - Bilík, M.
Svařování dílů v energetice laserem.
[Laser welding of parts in the energy industry.]
Interní kód: APL-2023-14 ; 2023
Technické parametry: Technologie svařování dílů v energetice laserem souvisí se svařování několika typů korozivzdorných martenzitických ocelí používaných v konstrukci parních turbín navzájem a také se svařováním těchto typů ocelí s feritickými ocelemi s vyšší pevností. Aplikace této technologie (s optimalizovaným nastavením svařovacích parametrů pro daný svar) přispívá ke vzniku svarů, které (na rozdíl od běžné metody svařování TIG) nevyžadují předehřev, svařování je strojní, jde mnohonásobně rychleji a díky malým deformacím nevyžadují mnoho dokončovacího obrábění po svařování.
Ekonomické parametry: Ověřená technologie realizovaná při řešení grantového projektu TA ČR Trend FW01010293 s předpokladem smluvního využití s ekonomickým přínosem i po jeho ukončení. Kontakt: doc. RNDr. Libor Mrňa, Ph.D., mrna@isibrno.cz.
Grant CEP: GA TA ČR(CZ) FW01010293
Institucionální podpora: RVO:68081731
Klíčová slova: laser welding * martensitic steel
Obor OECD: Materials engineering
Trvalý link: https://hdl.handle.net/11104/0349922