Výsledky vyhledávání
- 1.0571995 - ÚT 2024 RIV NL eng J - Článek v odborném periodiku
Gabrisch, H. - Janovská, Michaela - Rackel, M.W. - Pyczak, F. - Stark, A.
Impact of microstructure on elastic properties in the alloy Ti-42Al-8.5 Nb.
Journal of Alloys and Compounds. Roč. 932, January (2023), č. článku 167578. ISSN 0925-8388. E-ISSN 1873-4669
Grant CEP: GA ČR(CZ) GA20-12624S
Institucionální podpora: RVO:61388998
Klíčová slova: γ-TiAl * Nb * elastic properties * transmission electron microscopy * resonant ultrasound spectroscopy
Obor OECD: Materials engineering
Impakt faktor: 6.2, rok: 2022
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S092583882203969X
Trvalý link: https://hdl.handle.net/11104/0342847 - 2.0561578 - ÚFM 2023 RIV GB eng J - Článek v odborném periodiku
Abdoshahi, N. - Dehghani, M. - Ruban, A. V. - Friák, Martin - Šob, Mojmír - Spitaler, J. - Holec, D.
On the energetics of the cubic‐to‐hexagonal transformations in TiAl+Mo alloys.
Acta Materialia. Roč. 240, NOV (2022), č. článku 118268. ISSN 1359-6454. E-ISSN 1873-2453
Institucionální podpora: RVO:68081723
Klíčová slova: Density functional theory * TiAl * Martensitic transformations * Diffusionless transformations
Obor OECD: Condensed matter physics (including formerly solid state physics, supercond.)
Impakt faktor: 9.4, rok: 2022
Způsob publikování: Open access
https://www.sciencedirect.com/science/article/pii/S1359645422006486?via%3Dihub
Trvalý link: https://hdl.handle.net/11104/0334355 - 3.0542932 - ÚFM 2022 RIV GB eng J - Článek v odborném periodiku
Vinogradov, A. - Heczko, Milan - Mazánová, Veronika - Linderov, M. - Kruml, Tomáš
Kinetics of cyclically-induced mechanical twinning in γ-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy.
Acta Materialia. Roč. 212, JUN (2021), č. článku 116921. ISSN 1359-6454. E-ISSN 1873-2453
Grant CEP: GA MŠMT(CZ) LQ1601; GA MŠMT(CZ) EF16_025/0007304
Institucionální podpora: RVO:68081723
Klíčová slova: Acoustic emission * Cyclic deformation * Dislocation slip * Microscopy * Neutron diffraction * TiAl alloy * Twinning
Obor OECD: Materials engineering
Impakt faktor: 9.209, rok: 2021
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S1359645421003013?via%3Dihub
Trvalý link: http://hdl.handle.net/11104/0320812 - 4.0524225 - ÚFM 2021 RIV CH eng J - Článek v odborném periodiku
Chlupová, Alice - Heczko, Milan - Obrtlík, Karel - Dlouhý, Antonín - Kruml, Tomáš
Effect of heat-treatment on the microstructure and fatigue properties of lamellar γ-TiAl alloyed with Nb, Mo and/or C.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 786, JUN (2020), č. článku 139427. ISSN 0921-5093. E-ISSN 1873-4936
Grant CEP: GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: TiAl alloys * Heat treatment * Microstructure * Mechanical properties * Fatigue
Obor OECD: Materials engineering
Impakt faktor: 5.234, rok: 2020
Způsob publikování: Omezený přístup
https://doi.org/10.1016/j.msea.2020.139427
Trvalý link: http://hdl.handle.net/11104/0309678 - 5.0509810 - ÚFM 2024 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Hasegawa, M. - Hirata, K. - Dlouhý, Ivo
Microstructural change and fracture behavior under different heat exposure conditions on thermal barrier coatings deposited on tiAl intermetallic compound.
New Methods of Damage and Failure Analysis of Structural Parts. Zurich: Trans Tech Publication, 2019 - (Strnadel, B.), s. 27-33. Key Engineering Materials, 810. ISBN 978-3-0357-1447-0. ISSN 1013-9826.
[New Methods of Damage and Failure Analysis of Structural Parts. Ostrava (CZ), 10.09.2018-14.09.2018]
Institucionální podpora: RVO:68081723
Klíčová slova: TiAl intermetallic compound * thermal barrier coatings * heat exposure
Obor OECD: Materials engineering
https://www.scientific.net/KEM.810.27
Trvalý link: http://hdl.handle.net/11104/0301471 - 6.0509804 - ÚFM 2024 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Hasegawa, M. - Tomohiro, I. - Dlouhý, Ivo
Effect of heat treatment at (β+γ) two phase region on fracture toughness in tiAl intermetallic compound.
New Methods of Damage and Failure Analysis of Structural Parts. Zurich: Trans Tech Publication, 2019 - (Strnadel, B.), s. 21-26. Key Engineering Materials, 810. ISBN 978-3-0357-1447-0. ISSN 1013-9826.
[New Methods of Damage and Failure Analysis of Structural Parts. Ostrava (CZ), 10.09.2018-14.09.2018]
Institucionální podpora: RVO:68081723
Klíčová slova: TiAl intermetallic compound * β phase precipitation * fully lamellar * fracture toughness
Obor OECD: Materials engineering
https://www.scientific.net/KEM.810.21
Trvalý link: http://hdl.handle.net/11104/0301470 - 7.0494647 - ÚFM 2019 RIV CH eng J - Článek v odborném periodiku
Hasegawa, M. - Sakurai, K. - Stratil, Luděk - Dlouhý, Ivo - Fukutomi, H.
Fracture toughness of a lamellar orientation-controlled TiAl-based alloy processed by either one-step or two-step compression at high temperature.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 721, APR (2018), s. 303-310. ISSN 0921-5093. E-ISSN 1873-4936
Institucionální podpora: RVO:68081723
Klíčová slova: TiAl alloy * Dynamic recrystallization * Fully lamellar * Lamellae orientation control * Fracture toughness
Obor OECD: Materials engineering
Impakt faktor: 4.081, rok: 2018
Trvalý link: http://hdl.handle.net/11104/0287772 - 8.0481140 - ÚFM 2018 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Sakurai, K. - Hasegawa, M. - Dlouhý, Ivo
Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound.
Analysis of Damage Features and Failures for Structural Materials and Parts. Zürich: Trans Tech Publications Ltd, 2017 - (Strnadel, B.), s. 25-30. Key Engineering Materials, 741. ISBN 978-3-0357-1127-1. ISSN 1013-9826.
[2016 - International Workshop on New Methods of Damage and Failure Analysis of Structural Parts /7./. Yokohama (JP), 01.11.2016-04.11.2016]
Institucionální podpora: RVO:68081723
Klíčová slova: TiAl intermetallic compound * Massive transformation * Fracture toughness
Obor OECD: Materials engineering
Trvalý link: http://hdl.handle.net/11104/0276749 - 9.0480159 - ÚFM 2018 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Chlupová, Alice - Heczko, Milan - Obrtlík, Karel - Beran, Přemysl - Kruml, Tomáš
Effect of alloying and thermal processing on mechanical properties of tial alloys.
Materials Structure & Micromechanics of Fracture VIII. Zürrich: Trans Tech Publications, 2017 - (Šandera, P.), s. 501-505. Solid State Phenomena, 258. ISBN 978-3-03835-626-4. ISSN 1662-9779.
[MSMF8. International Conference on Materials Structure and Micromechanics of Fracture /8./. Brno (CZ), 27.06.2016-29.06.2016]
Grant CEP: GA ČR(CZ) GAP107/11/0704
Institucionální podpora: RVO:68081723 ; RVO:61389005
Klíčová slova: Fatigue * Heat treatment * Lamellar microstructure * Mechanical properties * TiAl alloys
Obor OECD: Audio engineering, reliability analysis; Audio engineering, reliability analysis (UJF-V); Audio engineering, reliability analysis (UFM-A)
Trvalý link: http://hdl.handle.net/11104/0276855 - 10.0449854 - ÚFM 2016 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Chlupová, Alice - Kruml, Tomáš - Roupcová, Pavla - Heczko, Milan - Obrtlík, Karel - Beran, Přemysl
THE EFFECT OF MO AND/OR C ADDITION ON MICROSTRUCTURE AND PROPERTIES OF TIAL ALLOYS.
Metal 2015: 24th International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd, 2015. ISBN 978-80-87294-58-1.
[METAL 2015 - International Conference on Metallurgy and Materials /24./. Brno (CZ), 03.06.2015-05.06.2015]
Grant CEP: GA ČR(CZ) GAP107/11/0704; GA ČR GA15-08826S; GA MŠMT(CZ) ED1.1.00/02.0068
Institucionální podpora: RVO:68081723 ; RVO:61389005
Klíčová slova: TiAl * microstructure * mechanical properties * effect of alloying * fractography
Kód oboru RIV: JL - Únava materiálu a lomová mechanika; BM - Fyzika pevných látek a magnetismus (UJF-V)
Trvalý link: http://hdl.handle.net/11104/0251584