Výsledky vyhledávání
- 1.0570429 - ÚFM 2025 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
Man, Jiří - Blinn, B. - Šulák, Ivo - Kuběna, Ivo - Smaga, M. - Chlup, Zdeněk - Kruml, Tomáš - Beck, T. - Polák, Jaroslav
Formation of deformation induced martensite in fatigued 316L steels manufactured by selective laser melting (SLM).
Procedia Structural Integrity. Vol. 43. Amsterdam: Elsevier B. V., 2023 - (Pokluda, J.; Šandera, P.), s. 203-208. ISSN 2452-3216.
[MSMF10 - International Conference on Materials Structure and Micromechanics of Fracture /10./. Brno (CZ), 12.09.2022-14.09.2022]
GRANT EU: European Commission(XE) 857124 - Horizont 2020
Institucionální podpora: RVO:68081723
Klíčová slova: Selective laser melting (SLM) * 316L stainless steel * fatigue * deformation induced martensite * cellular dislocation substructure
Obor OECD: Materials engineering
Trvalý link: https://hdl.handle.net/11104/0341956 - 2.0567583 - FZÚ 2023 RIV CZ eng Z - Poloprovoz, ověřená technologie, odrůda/plemeno
Ackemann, M. - Šafka, J. - Véle, F. - Zulic, Sanin - Krátký, T.
The technology of additively manufactured advanced surfaces for pump blades with subsequent LSP treatment.
Interní kód: 21/HiLASE 2022 ; 2022
Technické parametry: Installation of additively manufactured blades to the pump unit and verification of its performance in real conditions. Evaluation of pump characteristics with regard to the newly added blades. Following the 3D print and LSP treatment, the blades were CNC machined to it is the final hydraulic shape and installed in the pump. To ensure a valid comparison with the previously tested (CNC machined and LSPed) blades, the configuration of the testing was exactly the same as in 2020. I.e. closed circuit with a pressure vessel. The pump was then extensively tested for hydraulic and operational characteristics and long-term resistance to intensive cavitation regimes.
Ekonomické parametry: LSP surface treatment enables improvement of the Additive Manufacturing technology so it can be used for the production of critical parts and it can be used in the most demanding industries such as power generation, biomedical, etc. The advantages of the above-described process can be summarised in the following points: • Effectivity of the process from the energetic, financial and material points of view. • Possibility to produce individual geometries within one manufacturing cycle. • Additive manufacturing enables the use of special features such as a hollow inner core which may be filled with a lightweight structure. The surface of the blade can be defined to contain special elements enhancing the flow parameters of the liquid.
Grant CEP: GA TA ČR TN01000038
Institucionální podpora: RVO:68378271
Klíčová slova: SLM * LSP * blades * cavitation
Obor OECD: Optics (including laser optics and quantum optics)
Trvalý link: https://hdl.handle.net/11104/0339887 - 3.0558979 - FZÚ 2023 RIV GB eng J - Článek v odborném periodiku
Zulic, Sanin - Rostohar, Danijela - Kaufman, Jan - Pathak, Sunil - Kopeček, Jaromír - Böhm, Marek - Brajer, Jan - Mocek, Tomáš
Fatigue life enhancement of additive manufactured 316l stainless steel by LSP using a DPSS laser system.
Surface Engineering. Roč. 38, č. 2 (2022), s. 183-190. ISSN 0267-0844. E-ISSN 1743-2944
Grant CEP: GA MŠMT EF15_006/0000674; GA MŠMT(CZ) EF20_079/0017754
GRANT EU: European Commission(XE) 739573 - HiLASE CoE
Grant ostatní: OP VVV - HiLASE-CoE(XE) CZ.02.1.01/0.0/0.0/15_006/0000674; OP VVV - MSCA-IF IV FZU(XE) CZ.02.2.69/0.0/0.0/20_079/0017754
Institucionální podpora: RVO:68378271
Klíčová slova: laser shock peening * residual stress * fatigue * DPSS * additive manufacturing * SLM * SEM * EBSD
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 2.8, rok: 2022
Způsob publikování: Open access
Trvalý link: https://hdl.handle.net/11104/0333053Název souboru Staženo Velikost Komentář Verze Přístup 0558979.pdf 0 2.4 MB CC licence Vydavatelský postprint povolen - 4.0551133 - ÚPT 2022 RIV US eng A - Abstrakt
Mikmeková, Šárka - Man, Jiří - Konvalina, Ivo
Microstructural characterization of 316L stainless steel fabricated by selective laser melting by advanced electron microscopy techniques.
Microscopy and Microanalysis. Cambridge University Press. Roč. 27, S1 (2021), s. 2666-2668. ISSN 1431-9276. E-ISSN 1435-8115
Institucionální podpora: RVO:68081731 ; RVO:68081723
Klíčová slova: SLM process * 316L steel * microstructure characterization
Obor OECD: Materials engineering; Materials engineering (UFM-A)
https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/microstructural-characterization-of-316l-stainless-steel-fabricated-by-selective-laser-melting-by-advanced-electron-microscopy-techniques/A40184BD363CD59B9DC79F83BB4627F0
Trvalý link: http://hdl.handle.net/11104/0326578 - 5.0543995 - ÚFM 2022 RIV CH eng J - Článek v odborném periodiku
Neuberger, H. - Hernandez, F. - Ruck, S. - Arbeiter, F. - Bonk, S. - Rieth, M. - Stratil, Luděk - Müller, O. - Volker, K.U.
Advances in Additive Manufacturing of fusion materials.
Fusion Engineering and Design. Roč. 167, JUN (2021), č. článku 112309. ISSN 0920-3796. E-ISSN 1873-7196
Institucionální podpora: RVO:68081723
Klíčová slova: First Wall (FW) * Breeding Blanket (BB) * Test Blanket Module (TBM) * Additive Manufacturing (AM) * Selective Laser Melting (SLM) * Cold Spray (CS)
Obor OECD: Materials engineering
Impakt faktor: 1.905, rok: 2021
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S0920379621000855?via%3Dihub
Trvalý link: http://hdl.handle.net/11104/0321136 - 6.0537349 - FZÚ 2021 RIV CH eng K - Konferenční příspěvek (tuzemská konf.)
Roudnicka, M. - Alarcón Tarquino, Eduardo - Vojtěch, D.
Choosing a suitable heat treatment regime for stress-relief and microstructure stabilization of ti6al4v alloy 3d-printed by slm method.
Defect and Diffusion Forum, vol. 403. Zürich: Trans Tech Publications, 2020 - (Jurci, P.), s. 11-18. ISSN 1012-0386.
[National Conference on Heat Treatment /27./. Jihlava (CZ), 26.11.2019-28.11.2019]
Institucionální podpora: RVO:68378271
Klíčová slova: Ti6Al4V * heat treatment * 3D printing * SLM
Obor OECD: Condensed matter physics (including formerly solid state physics, supercond.)
Trvalý link: http://hdl.handle.net/11104/0315075 - 7.0499020 - ÚIACH 2019 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Ryšavá, Lenka - Přikryl, Jan - Dvořák, Miloš - Malá, Zdeňka - Kubáň, Pavel
Rapid fabrication of microextraction devices for direct determination of basic drugs in dried blood spots.
CECE 2018. 15th International Interdisciplinary Meeting on Bioanalysis. Brno: Ústav analytické chemie AV ČR, v. v. i., 2018 - (Foret, F.; Křenková, J.; Drobníková, I.; Klepárník, K.; Přikryl, J.), s. 257-260. ISBN 978-80-904959-5-1.
[CECE 2018. International Interdisciplinary Meeting on Bioanalysis /15./. Brno (CZ), 15.10.2018-17.10.2018]
Grant CEP: GA ČR(CZ) GA18-13135S
Institucionální podpora: RVO:68081715
Klíčová slova: supported liquid membrane (SLM) * capillary electrophoresis * microextraction devices
Obor OECD: Analytical chemistry
http://www.ce-ce.org/user_uploads/program/CECE%202018%20Proceedings_WOS.pdf
Trvalý link: http://hdl.handle.net/11104/0291313Název souboru Staženo Velikost Komentář Verze Přístup 0499020.pdf 2 304.9 KB Jiná povolen - 8.0497404 - FZÚ 2019 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Fousová, M. - Dvorský, Drahomír - Lejček, Pavel - Vojtěch, D.
Metallic materials prepared by selective laser melting: part orientation issue.
Smart Materials Technologies III. Zurich: Trans Tech Publications Ltd, 2018 - (Polyakova, M.), s. 165-173. Key Engineering Materials, 779. ISBN 978-303571278-0. ISSN 1662-9795.
[ICSMT 2018 - International Conference on Smart Materials Technologies /3./. Moscow (RU), 21.06.2018-23.06.2018]
Grant CEP: GA ČR GBP108/12/G043
Institucionální podpora: RVO:68378271
Klíčová slova: 3D printing * SLM * titanium alloy * stainless steel * aluminium alloy * iron
Obor OECD: Condensed matter physics (including formerly solid state physics, supercond.)
Trvalý link: http://hdl.handle.net/11104/0290157 - 9.0473467 - ÚVGZ 2017 RIV CZ eng J - Článek v odborném periodiku
Aysan Badraghi, Naghimeh - Erler, J. - Hosseini, S. A. O.
Residual damage in different ground logging methods alongside skid trails and winching strips.
Journal of Forest Science. Roč. 61, č. 12 (2015), s. 526-534. ISSN 1212-4834
Institucionální podpora: RVO:67179843
Klíčová slova: Long-length method (LLM) * Short-length method (SLM) * Skidding and winching operations * Tree-length method (TLM)
Kód oboru RIV: EF - Botanika
Trvalý link: http://hdl.handle.net/11104/0270582 - 10.0449075 - ÚIACH 2016 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Pantůčková, Pavla - Kubáň, Pavel - Boček, Petr
Polymer inclusion membranes open new way in practical use of in-line coupling of microextraction to CZE.
CECE 2015. 12th International Interdisciplinary Meeting on Bioanalysis. Brno: Ústav analytické chemie AV ČR, v. v. i, 2015 - (Foret, F.; Křenková, J.; Drobníková, I.; Klepárník, K.), s. 169-172. ISBN 978-80-904959-3-7.
[CECE 2015. International Interdisciplinary Meeting on Bioanalysis /12./. Brno (CZ), 21.09.2015-23.09.2015]
Grant CEP: GA ČR(CZ) GA13-05762S
Institucionální podpora: RVO:68081715
Klíčová slova: PIMs * electromembrane extraction * CZE * SLM
Kód oboru RIV: CB - Analytická chemie, separace
http://www.ce-ce.org/CECE2015/CECE%202015%20proceedings_full.pdf
Trvalý link: http://hdl.handle.net/11104/0250675Název souboru Staženo Velikost Komentář Verze Přístup 0449075.pdf 2 713.9 KB Jiná povolen