Výsledky vyhledávání
- 1.0555179 - ÚGN 2023 RIV cze P1 - Užitný vzor, průmyslový vzor
Hela, R. - Bodnárová, L. - Hlaváček, Petr - Sitek, Libor
Zařízení pro zkoumání povrchu cementového kompozitu.
[Equipment for examining the surface of cement composite.]
2020. Vlastník: Ústav geoniky AV ČR, v. v. i. - Vysoké učení technické v Brně. Datum udělení vzoru: 01.06.2020. Číslo vzoru: 34 060
Institucionální podpora: RVO:68145535
Klíčová slova: cementitious composites * resistance to erosion * sealing additive
Obor OECD: Mechanical engineering
https://isdv.upv.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0034/uv034060.pdf
Trvalý link: http://hdl.handle.net/11104/0330359 - 2.0484561 - ÚFM 2018 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Řoutil, L. - Veselý, V. - Seitl, Stanislav
Fracture Analysis of Cube- and Cylinder-shaped WST Specimens Made of Cementitious Composites with Various Characteristic Length.
Key Engineering Materials. In: ADVANCES IN FRACTURE AND DAMAGE MECHANICS X. Zurich: Trans Tech Publications, 2012 - (Tonkovic, Z.; Aliabadi, M.), s. 533-536. Key Engineering Materials, 488-489. ISBN 978-3-0378-5218-7. ISSN 1013-9826.
[International Conference on Fracture and Damage Mechanics - FDM 2011 /10./. Dubrovník (HR), 19.09.2011-21.09.2011]
Grant CEP: GA AV ČR KJB200410901
Institucionální podpora: RVO:68081723
Klíčová slova: wedge-splitting test * cementitious composites * quasi-brittle fracture * brittleness * characteristic length * notch length
Obor OECD: Audio engineering, reliability analysis
Trvalý link: http://hdl.handle.net/11104/0279732 - 3.0472580 - ÚFM 2017 RIV GR eng J - Článek v odborném periodiku
Vala, J. - Hobst, L. - Kozák, Vladislav
Detection of metal fibres in cementitious composites based on signal and image processing approaches.
WSEAS Transactions on Applied and Theoretical Mechanics. Roč. 10, č. 1 (2015), s. 39-46. ISSN 1991-8747
Institucionální podpora: RVO:68081723
Klíčová slova: Cementitious composites * Computational simulation * Non-destructive testing
Kód oboru RIV: JI - Kompozitní materiály
Trvalý link: http://hdl.handle.net/11104/0269980 - 4.0454720 - ÚFM 2016 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Holušová, T. - Seitl, Stanislav - Canteli, A.
Numerical Simulation of Modified Compact Tension Test depicting of Experimental Measurement by ARAMIS.
Advances in Fracture and Damage Mechanics XIII. Zürich: Trans Tech publications, 2015 - (Alfaiate, J.; Aliabadi, M.), s. 277-280. Key Engineering Materials, 627. ISBN 978-3-03835-235-8. ISSN 1013-9826.
[FDM 2014 International Conference on Fracture and Damage Mechanics /13./. São Miguel Island, Azores (PT), 23.09.2014-25.09.2014]
Institucionální podpora: RVO:68081723
Klíčová slova: Modified Compact Tension Test * Fracture Parameters * Cementitious Composites * Cohesive Law * finite element method * ARAMIS measurement
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
Trvalý link: http://hdl.handle.net/11104/0255405 - 5.0454610 - ÚFM 2017 RIV IT eng J - Článek v odborném periodiku
Holušová, Táňa - Seitl, Stanislav - Cifuentes, H. - Canteli, A.
A numerical study of two different specimen fixtures for the modified compact tension test – their influence on concrete fracture parameters.
Frattura ed Integrita Strutturale. Roč. 10, č. 35 (2016), s. 242-249. ISSN 1971-8993
Institucionální podpora: RVO:68081723
Klíčová slova: Modified Compact Tension Test * Fracture Parameters * Cementitious Composites * FEM
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
Trvalý link: http://hdl.handle.net/11104/0258584 - 6.0454460 - ÚFM 2016 RIV CZ eng J - Článek v odborném periodiku
Holušová, T. - Lozano, M. - Canteli, A. - Komárková, T. - Kocáb, D. - Seitl, Stanislav
Influence of the gripping fixture on the modified compact tension test results: Evaluation of the experiments on cylindrical concrete specimens.
Transactions of the VŠB - Technical University of Ostrava, Construction Series. Roč. 15, č. 2 (2015). ISSN 1804-4824
Institucionální podpora: RVO:68081723
Klíčová slova: Modified compact tension test * fracture parametr * Cementitious composites * Aramis measurement * grips
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
Trvalý link: http://hdl.handle.net/11104/0255184 - 7.0453019 - ÚFM 2016 RIV CZ cze L - Prototyp, funkční vzorek
Seitl, Stanislav - Veselý, V.
Přípravek pro vnášení zatížení při štípacím lomovém testu cementových kompozitů.
[A tool for impose of the load in wedge splitting fracture test for cement-based composites.]
Interní kód: Loteck ; 2015
Technické parametry: Sklon klínu 15°, maximální délka zatěžovací dráhy 120 mm, maximální šířka tělesa 150 mm, maximální zatížení 50 kN
Ekonomické parametry: zvýšení přesnosti a efektivnosti měření lomových parametrů cementových kompozitů
Grant CEP: GA MŠMT(CZ) ED1.1.00/02.0068
Institucionální podpora: RVO:68081723
Klíčová slova: wedge splitting test * cementitious composites * fracture parameters * fracture energy
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
http://www.ipm.cz/group/doc/ceitec/Seitl_pripravek_funkcni_vzorek.pdf
Trvalý link: http://hdl.handle.net/11104/0253913 - 8.0354597 - ÚFM 2011 RIV CH eng J - Článek v odborném periodiku
Seitl, Stanislav - Klusák, Jan - Veselý, V. - Řoutil, L.
Wedge-Splitting Test – Determination of Minimal Starting Notch Length for Various Cement Based Composites.
Key Engineering Materials. 452-453, - (2011), s. 81-84. ISSN 1013-9826
Grant CEP: GA AV ČR KJB200410901; GA ČR GA103/08/0963
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: wedge-splitting test, cementitious composites, quasi-brittle fracture, brittle fracture
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
www.scientific.net
Trvalý link: http://hdl.handle.net/11104/0193566 - 9.0354593 - ÚFM 2011 RIV CH eng J - Článek v odborném periodiku
Veselý, V. - Řoutil, L. - Seitl, Stanislav
Wedge-Splitting Test – Determination of Minimal Starting Notch Length for Various Cement Based Composites. Part I: Cohesive Crack Modelling.
Key Engineering Materials. Roč. 452-453, - (2011), s. 77-80. ISSN 1013-9826
Grant CEP: GA AV ČR KJB200410901
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: wedge-splitting test * cementitious composites * quasi-brittle fracture * brittleness
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
Trvalý link: http://hdl.handle.net/11104/0193563 - 10.0332436 - ÚFM 2010 RIV SK eng C - Konferenční příspěvek (zahraniční konf.)
Seitl, Stanislav - Veselý, V. - Řoutil, L.
Numerical analysis of crack tip stress field for wedge splitting geometry.
[Numerická analýza pole napětí okolo vrcholu trhliny pro wedge splitting geometrii.]
Applied mechanics 2009. Bratislava: FX, s.r.o., 2009 - (Jančo, R.), s. 270-278. ISBN 978-80-89313-33-4.
[Applied Mechanics 2009. Smolenice (SK), 06.04.2009-08.04.2009]
Grant CEP: GA AV ČR(CZ) KJB200410901
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: fracture * cementitious composites * wedge splitting test * compact tension test * K-factor * T-stress * numerical analysis
Kód oboru RIV: JL - Únava materiálu a lomová mechanika
Trvalý link: http://hdl.handle.net/11104/0177696