Výsledky vyhledávání
- 1.0535173 - ÚFM 2021 RIV CH eng J - Článek v odborném periodiku
Král, Petr - Dvořák, Jiří - Blum, W. - Sklenička, Václav - Horita, Z. - Takizawa, Y. - Tang, Y. - Kunčická, Lenka - Kocich, R. - Kvapilová, Marie - Svobodová, M.
The Effect of Predeformation on Creep Strength of
9% Cr Steel.
Materials. Roč. 13, č. 23 (2020), č. článku 5330. E-ISSN 1996-1944
Grant CEP: GA ČR(CZ) GA19-18725S
Institucionální podpora: RVO:68081723
Klíčová slova: creep-resistant 9% Cr steels * severe plastic deformation * microstructure
Obor OECD: Materials engineering
Impakt faktor: 3.623, rok: 2020
Způsob publikování: Open access
https://www.mdpi.com/1996-1944/13/23/5330
Trvalý link: http://hdl.handle.net/11104/0313257 - 2.0525153 - ÚFM 2021 RIV CH eng J - Článek v odborném periodiku
Král, Petr - Blum, W. - Dvořák, Jiří - Yurchenko, N. - Stepanov, N. - Zherebtsov, S. - Kunčická, Lenka - Kvapilová, Marie - Sklenička, Václav
Creep behavior of an AlTiVNbZr0.25 high entropy alloy at 1073 K.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 783, č. 5 (2020), č. článku 139291. ISSN 0921-5093. E-ISSN 1873-4936
Grant CEP: GA MŠMT LM2015069
Institucionální podpora: RVO:68081723
Klíčová slova: High Entropy alloys * Creep * Deformation mechanisms * viscous glide
Obor OECD: Materials engineering
Impakt faktor: 5.234, rok: 2020
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S0921509320303749?via%3Dihub
Trvalý link: http://hdl.handle.net/11104/0309651 - 3.0517145 - ÚFM 2020 RIV CH eng J - Článek v odborném periodiku
Blum, W. - Dvořák, Jiří - Král, Petr - Eisenlohr, P. - Sklenička, Václav
Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu–Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 Tm.
Metals. Roč. 9, č. 11 (2019), č. článku 1150. E-ISSN 2075-4701
Institucionální podpora: RVO:68081723
Klíčová slova: Cu–Zr * ECAP * ultrafine-grained material * deformation * dynamic recovery * transient * load change tests
Obor OECD: Materials engineering
Impakt faktor: 2.117, rok: 2019
Způsob publikování: Open access
https://www.mdpi.com/2075-4701/9/11/1150/htm
Trvalý link: http://hdl.handle.net/11104/0302509 - 4.0517117 - ÚFM 2020 RIV CH eng J - Článek v odborném periodiku
Blum, W. - Dvořák, Jiří - Král, Petr - Eisenlohr, P. - Sklenička, Václav
Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 T-m.
Metals. Roč. 9, č. 11 (2019), č. článku 1149. E-ISSN 2075-4701
Institucionální podpora: RVO:68081723
Klíčová slova: Cu-Zr * ECAP * deformation * quasi-stationary * subgrains * grains * coarsening
Obor OECD: Materials engineering
Impakt faktor: 2.117, rok: 2019
Způsob publikování: Open access
https://www.mdpi.com/2075-4701/9/11/1149/htm
Trvalý link: http://hdl.handle.net/11104/0302510 - 5.0496155 - ÚFM 2019 RIV CH eng J - Článek v odborném periodiku
Blum, W. - Dvořák, Jiří - Král, Petr - Sklenička, Václav
Dynamic grain coarsening in creep of pure Cu at 0.42 Tm after predeformation by ECAP.
Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. Roč. 731, JUL (2018), s. 520-529. ISSN 0921-5093. E-ISSN 1873-4936
Grant CEP: GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: Cu * Recovery * Grain coarsening * Creep * Grain boundaries
Obor OECD: Materials engineering
Impakt faktor: 4.081, rok: 2018
Trvalý link: http://hdl.handle.net/11104/0288965 - 6.0483092 - ÚFM 2018 RIV US eng J - Článek v odborném periodiku
Blum, W. - Král, Petr - Dvořák, Jiří - Petrenec, M. - Eisenlohr, P. - Sklenička, Václav
In situ study of thermally activated flow and dynamic restoration of ultrafine-grained pure Cu at 373 K.
Journal of Materials Research. Roč. 32, č. 24 (2017), s. 4514-4521. ISSN 0884-2914. E-ISSN 2044-5326
Grant CEP: GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: Cu * dynamic grain coarsening * dynamic recovery * ECAP * in situ * stress relaxation * UFG
Obor OECD: Materials engineering
Impakt faktor: 1.495, rok: 2017
Trvalý link: http://hdl.handle.net/11104/0279782 - 7.0482058 - ÚFM 2018 RIV US eng J - Článek v odborném periodiku
Král, Petr - Blum, W. - Dvořák, Jiří - Eisenlohr, P. - Petrenec, M. - Sklenička, Václav
Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ.
Materials Characterization. Roč. 134, DEC (2017), s. 329-334. ISSN 1044-5803. E-ISSN 1873-4189
Grant CEP: GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: ECAP * Dynamic grain coarsening * UFG copper * In situ
Obor OECD: Materials engineering
Impakt faktor: 2.892, rok: 2017
Trvalý link: http://hdl.handle.net/11104/0277460 - 8.0470411 - ÚFM 2018 RIV NL eng J - Článek v odborném periodiku
Král, Petr - Dvořák, Jiří - Kvapilová, Marie - Blum, W. - Sklenička, Václav
The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper.
Materials Letters. Roč. 188, FEB (2017), s. 235-238. ISSN 0167-577X. E-ISSN 1873-4979
Grant CEP: GA MŠMT(CZ) LQ1601
Institucionální podpora: RVO:68081723
Klíčová slova: Equal-channel angular pressing (ECAP) * Ultrafine-grained microstructure * Creep behaviour * Microstructure stability
Obor OECD: Materials engineering
Impakt faktor: 2.687, rok: 2017
Trvalý link: http://hdl.handle.net/11104/0268100 - 9.0468252 - ÚFM 2017 RIV NL eng J - Článek v odborném periodiku
Blum, W. - Dvořák, Jiří - Král, Petr - Eisenlohr, P. - Sklenička, Václav
Effects of Grain Refinement by ECAP on the Deformation Resistance of
Al Interpreted in Terms of Boundary-Mediated Processes.
Journal of Materials Science & Technology. Roč. 32, č. 12 (2016), s. 1309-1320. ISSN 1005-0302
Grant CEP: GA MŠMT(CZ) ED1.1.00/02.0068
Institucionální podpora: RVO:68081723
Klíčová slova: Deformation * Grain boundaries * Equal channel angular pressing (ECAP) * Creep * Dynamic recovery * Fine grained microstructure
Kód oboru RIV: JG - Hutnictví, kovové materiály
Impakt faktor: 2.764, rok: 2016
Trvalý link: http://hdl.handle.net/11104/0266116 - 10.0463463 - ÚFM 2017 RIV US eng J - Článek v odborném periodiku
Král, Petr - Dvořák, Jiří - Blum, W. - Kudryavtsev, E. - Zherebtsov, S. - Salishchev, G. - Kvapilová, Marie - Sklenička, Václav
Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD.
Materials Characterization. Roč. 116, JUN (2016), s. 84-90. ISSN 1044-5803. E-ISSN 1873-4189
Grant CEP: GA MŠMT(CZ) ED1.1.00/02.0068
Institucionální podpora: RVO:68081723
Klíčová slova: Creep behavior * Solute strengthening * Titanium alloy * Ultrafine-grained microstructure
Kód oboru RIV: JG - Hutnictví, kovové materiály
Impakt faktor: 2.714, rok: 2016
Trvalý link: http://hdl.handle.net/11104/0262793