Výsledky vyhledávání
- 1.0578756 - ÚT 2024 CZ eng C - Konferenční příspěvek (zahraniční konf.)
Fiala, L. - Ballo, I. - Kovář, J. - Fuis, Vladimír
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter.
Engineering Mechanics 2023. Prague: Institute of Thermomechanics of the Czech Academy of Sciences, 2023 - (Radolf, V.; Zolotarev, I.), 63 - 66, s. 63-66. ISBN 978-80-87012-84-0. ISSN 1805-8248. E-ISSN 1805-8256.
[Engineering Mechanics 2023 /29./. Milovy (CZ), 09.05.2023-11.05.2023]
Institucionální podpora: RVO:61388998
Klíčová slova: nanoindentation * FEM * Berkovich indenter * conical indenter * tungsten
Obor OECD: Mechanical engineering
https://www.engmech.cz/im/proceedings/search/2023
Trvalý link: https://hdl.handle.net/11104/0351905 - 2.0548887 - ÚT 2022 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Kovář, J. - Fuis, Vladimír - Čtvrtlík, Radim
Influencing of the Pile-Up and the Sink-In by the Coefficient of Friction in the Nanoindentation Test.
Engineering mechanics 2020. 26th International conference. Book of full texts. Brno: Brno University od Technology, 2020 - (Fuis, V.), s. 298-301. ISBN 978-80-214-5896-3. ISSN 1805-8248.
[International Conference Engineering Mechanics 2020 /26./. Brno (CZ), 24.11.2020-25.11.2020]
Institucionální podpora: RVO:61388998 ; RVO:68378271
Klíčová slova: nanoindentation * pile-up * sink-in * coefficient of friction * FEM
Obor OECD: Applied mechanics; Materials engineering (FZU-D)
https://www.engmech.cz/2020/im/im/page/proc
Trvalý link: http://hdl.handle.net/11104/0327275 - 3.0548886 - ÚT 2022 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Fuis, Vladimír - Kašuba, D.
Stress and Deformation of the Filter Press.
ENGINEERING MECHANICS 2020 (IM2020). Brno: Brno Univ Technol, 2020 - (Fuis, V.), s. 146-149. ISBN 978-80-214-5896-3. ISSN 1805-8248. E-ISSN 1805-8256.
[International Conference Engineering Mechanics 2020 /26./. Brno (CZ), 24.11.2020-25.11.2020]
Institucionální podpora: RVO:61388998
Klíčová slova: filter press * envites * finite element method * large deformation
Obor OECD: Applied mechanics
https://www.engmech.cz/2020/im/im/page/proc
Trvalý link: http://hdl.handle.net/11104/0327438 - 4.0535276 - ÚT 2021 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Kovář, J. - Fuis, Vladimír - Tomaštík, Jan
Influencing the Indentation Curves by the Bluntness of the Berkovich Indenter at the Fem Modelling.
Acta Polytechnica CTU Proceedings. Prague: CTU, 2020 - (Nemecek, J.; Haušild, P.; Čtvrtlík, R.), s. 131-135. ISBN 978-80-01-06735-2. ISSN 2336-5382.
[International Conference on Local Mechanical Properties - LMP 2019 /14./. Praha (CZ), 06.11.2019-08.11.2019]
Institucionální podpora: RVO:61388998 ; RVO:68378271
Klíčová slova: Berkovich indenter * bluntness * finite element method * nanoindentation
Obor OECD: Applied mechanics; Applied mechanics (FZU-D)
https://ojs.cvut.cz/ojs/index.php/APP/article/view/6706
Trvalý link: http://hdl.handle.net/11104/0315810 - 5.0535270 - ÚT 2021 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Kovář, J. - Fuis, Vladimír
FEM simulation of the nanoindentation test with rigid non-rigid indenter.
Engineering mechanics 2019. Book of full texts. Prague: Institute of Thermomechanics of the Czech Academy of Sciences, 2019 - (Zolotarev, I.; Radolf, V.), s. 189-192. ISBN 978-80-87012-71-0. ISSN 1805-8248.
[Engineering mechanics 2019 /25./. Svratka (CZ), 13.05.2019-16.05.2019]
Institucionální podpora: RVO:61388998
Klíčová slova: nanoindentation * conical indenter * silica * FEM
Obor OECD: Applied mechanics
https://www.engmech.cz/improc/2019/042_Kovar_026.pdf
Trvalý link: http://hdl.handle.net/11104/0315816 - 6.0535263 - ÚT 2021 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Fuis, Vladimír
Sensitivity Analysis of the Material Parameters Obtained from the Measurements.
PROCEEDINGS OF THE 2018 18TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME). Brno: Institute of Electrical and Electronics Engineers Inc., 2018 - (Maga, D.; Stefek, A.; Brezina, T.), s. 505-510, č. článku 8624693. ISBN 978-80-214-5544-3.
[International Conference on Mechatronics - Mechatronika (ME) /18./. Brno (CZ), 05.12.2018-07.12.2018]
Institucionální podpora: RVO:61388998
Klíčová slova: material parameters * measurement * principal stress * sensor – strain gauge * sensitivity analysis * Weibull's weakest link theory
Obor OECD: Mechanical engineering
Trvalý link: http://hdl.handle.net/11104/0315825 - 7.0535254 - ÚT 2021 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Kovář, J. - Fuis, Vladimír
Comparing the Results of Probability of Ceramic Head Fracture According to Weibull's Theory with Inclusion of One or Three Principal Stresses.
PROCEEDINGS OF THE 2018 18TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME). Brno: Institute of Electrical and Electronics Engineers Inc., 2018 - (Maga, D.; Stefek, A.; Brezina, T.), s. 453-460, č. článku 8624760. ISBN 978-80-214-5544-3.
[International Conference on Mechatronics - Mechatronika (ME) /18./. Brno (CZ), 05.12.2018-07.12.2018]
Institucionální podpora: RVO:61388998
Klíčová slova: ceramic * Weibull's weakest link theory * probability of failure * Gaussian quadrature * head of hip joint endoprothesis * sensors * measurement
Obor OECD: Applied mechanics
Trvalý link: http://hdl.handle.net/11104/0315814 - 8.0503400 - ÚT 2019 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Svojanovský, T. - Fuis, Vladimír
Stress analysis of the thin coating of the trapeziometacarpal replacement.
Defect and Diffusion Forum. Švýcarsko: Trans Tech Publication, 2018 - (Yahaya, M.; Ohashi, T.), s. 213-217. Defect and Diffusion Forum, 382. ISBN 978-303571209-4. ISSN 1012-0386.
[International Conference on Engineering and Innovative Materials /6./. Tokyo (JP), 03.09.2017-05.09.2017]
Institucionální podpora: RVO:61388998
Klíčová slova: stress analysis * trapeziometacarpal replacement * DLC coating * biomechanics * finite element method
Obor OECD: Mechanical engineering
Trvalý link: http://hdl.handle.net/11104/0295288 - 9.0453639 - ÚT 2016 RIV PL eng C - Konferenční příspěvek (zahraniční konf.)
Fuis, Vladimír - Janíček, Přemysl
Sensitivity Analysis of the Material Parameters of the Ceramics on the Inner Radius of the Hip Joint Endoprosthesis Head.
Advanced Mechatronics Solutions. Warsawa: Springer, 2015 - (Jablonski, R.; Brezina, T.), s. 123-128. Advances in Intelligent Systems and Computing, 393. ISBN 978-3-319-23921-7. ISSN 2194-5357.
[Mechatronics 2015. Varšava (PL), 21.09.2015-13.09.2015]
Grant CEP: GA ČR GA13-34632S
Institucionální podpora: RVO:61388998
Klíčová slova: hip joint endoprosthesis * ceramic head * material parameters * weibull's weakest-link theory * sensitivity analysis
Kód oboru RIV: JH - Keramika, žáruvzdorné materiály a skla
Trvalý link: http://hdl.handle.net/11104/0254430 - 10.0441585 - ÚT 2015 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Fuis, Vladimír - Janíček, Přemysl
Stress analysis of the hip joint endoprosthesis ceramic head for different values of shape deviations.
Advanced Materials Research. Dürnten: Trans Tech Publications Ltd, 2014, s. 770-775. 936. ISBN 978-3-03835-102-3. ISSN 1022-6680.
[International Conference on Materials Science and Engineering Technology 2014. Shanghai (CN), 28.06.2014-19.06.2014]
Grant CEP: GA ČR(CZ) GA13-34632S
Institucionální podpora: RVO:61388998
Klíčová slova: hip joint endoprosthesis * ceramic head * shape deviation * cone contact areas
Kód oboru RIV: JH - Keramika, žáruvzdorné materiály a skla
Trvalý link: http://hdl.handle.net/11104/0244577