Výsledky vyhledávání
- 1.0585988 - ÚTAM 2025 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Šorm, Filip
Acoustic emission methods in steel bridge degradation identification and monitoring.
Engineering mechanics 2024. Book of full texts. Brno: Brno University of Technology, 2024 - (Fuis, V.; Hájek, P.), s. 282-285. ISBN 978-80-214-6235-9. ISSN 1805-8248.
[Engineering mechanics 2024 /30./. Milovy (CZ), 14.05.2024-16.05.2024]
Grant CEP: GA TA ČR(CZ) CK04000042
Institucionální podpora: RVO:68378297
Klíčová slova: steel bridges * diagnostics * acoustic emission
Obor OECD: Civil engineering
Trvalý link: https://hdl.handle.net/11104/0353610 - 2.0585689 - ÚFP 2025 RIV CH eng J - Článek v odborném periodiku
Kaviti, A. K. - Akkala, S. R. - Pohořelý, M. - Sikarwar, Vineet Singh
Performance Analysis of Floating Structures in Solar-Powered Desalination.
Energies. Roč. 17, č. 3 (2024), č. článku 621. E-ISSN 1996-1073
Institucionální podpora: RVO:61389021
Klíčová slova: Cr-Mn-Fe oxide * floating absorber * nano-coating * solar desalination * stainless steel
Obor OECD: Energy and fuels
Impakt faktor: 3.2, rok: 2022
Způsob publikování: Open access
https://www.mdpi.com/1996-1073/17/3/621
Trvalý link: https://hdl.handle.net/11104/0353378 - 3.0585550 - ÚFM 2025 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
Dvořák, Jiří - Král, Petr - Sklenička, Václav - Kvapilová, Marie - Šifner, J. - Koula, V. - Oháňková, M.
Study of Creep Damage in P92 Steel Using Acoustic Emission.
Procedia Structural Integrity. Vol. 52. Amsterdam: Elsevier B.V., 2024 - (Aliabadi, F.; Khodaei, Z.), s. 259-266. ISSN 2452-3216.
[FDM 2023 - International Conference on Fracture, Damage and Structural Health Monitoring /21./. London (GB), 12.09.2023-14.09.2023]
Grant CEP: GA TA ČR(CZ) TK03020089
Institucionální podpora: RVO:68081723
Klíčová slova: creep * P92 steel * creep deformation and fracture mechanisms
Obor OECD: Materials engineering
Trvalý link: https://hdl.handle.net/11104/0353301 - 4.0585446 - ÚCHP 2025 AE eng A - Abstrakt
Topka, Pavel - Jirátová, Květa - Čada, Martin - Naiko, Iryna - Ostapenko, Alina - Balabánová, Jana - Koštejn, Martin - Maixner, J. - Hubička, Zdeněk - Kovanda, F.
Plasma Jet Sputtering as an Efficient Tool for the Preparation of Transition Metal Oxide Catalysts Supported on Stainless Steel Meshes.
Conferences' Program. SAE: Setcor Media, 2024. ISBN N.
[SICT 2024, PLASMA TECH 2024 AND TRIBOLOGY 2024 JOINT INTERNATIONAL CONFERENCES. 17.04.2024-19.04.2024, Vienna]
Grant CEP: GA ČR(CZ) GA21-04477S
Institucionální podpora: RVO:67985858 ; RVO:68378271
Klíčová slova: low-temperature plasma jet sputtering * transi-tione metal oxides * stainless steel meshes
Obor OECD: Chemical process engineering; Fluids and plasma physics (including surface physics) (FZU-D)
https://setcor.org/userfiles/files/2024/Vienna/SICT-PlasmaTech-Tribology-2024-Joint-Conferences-Program.pdf
Trvalý link: https://hdl.handle.net/11104/0353154Název souboru Staženo Velikost Komentář Verze Přístup SICT_24.docx 3 480.4 KB Autorský postprint povolen - 5.0585386 - ÚFM 2025 RIV CH eng J - Článek v odborném periodiku
Yarasu, V. - Jurči, P. - Ptačinová, J. - Dlouhý, Ivo - Horník, J.
Effect of Cryogenic Treatments on Hardness, Fracture Toughness, and Wear Properties of Vanadis 6 Tool Steel.
Materials. Roč. 17, č. 7 (2024), č. článku 1688. E-ISSN 1996-1944
Institucionální podpora: RVO:68081723
Klíčová slova: dry sliding wear * tribological behavior * resistance * microstructure * enhancement * time * cryogenic treatment * cold-work tool steel * hardness * fracture toughness * tribological properties * wear mechanisms
Obor OECD: Materials engineering
Impakt faktor: 3.4, rok: 2022
Způsob publikování: Open access
https://www.mdpi.com/1996-1944/17/7/1688
Trvalý link: https://hdl.handle.net/11104/0353121 - 6.0584746 - ÚFM 2025 RIV US eng J - Článek v odborném periodiku
Babinský, Tomáš - Poczklán, Ladislav - Gálíková, Markéta - Polák, Jaroslav
Importance of γ′shearing in low-cycle fatigue of a wrought superalloy.
Fatigue and Fracture of Engineering Materials and Structures. early access (2024). ISSN 8756-758X. E-ISSN 1460-2695
Institucionální podpora: RVO:68081723
Klíčová slova: high-temperature * hysteresis loop * room-temperature * behavior * mechanisms * damage * oxidation * fracture * steel * cyclic plasticity * gamma prime shearing * low-cycle fatigue * persistent slip band * Rene 41
Impakt faktor: 3.7, rok: 2022
Způsob publikování: Omezený přístup
https://onlinelibrary.wiley.com/doi/10.1111/ffe.14272
Trvalý link: https://hdl.handle.net/11104/0352726 - 7.0583596 - ÚFM 2025 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
Domski, J. - Gancarz, M. - Benešová, A. - Šimonová, H. - Seitl, Stanislav - Frantík, P. - Keršner, Z.
Effect of tire cords, steel and polypropylene fiber content on the fatigue response of cement-based mortars.
Advances in Science and Technology. Vol. 145. Zurich: Trans Tech Publications Ltd, Switzerland, 2024, s. 77-86. ISSN 1662-0356.
[NTCC 2023 - International Conference Non-Traditional Cement & Concrete /7./. Brno (CZ), 25.06.2023-28.06.2023]
Grant CEP: GA ČR GA21-08772S; GA MŠMT(CZ) 8J22AT008
Institucionální podpora: RVO:68081723
Klíčová slova: Cement-based composite * fiber * tire cord * steel * polypropylene * compressive test
Obor OECD: Civil engineering
Trvalý link: https://hdl.handle.net/11104/0352711 - 8.0583215 - ÚPT 2024 RIV CZ cze C - Konferenční příspěvek (zahraniční konf.)
Mrňa, Libor - Šebestová, Hana - Horník, Petr - Novotný, Jan
Hybridní svařování laser-MIG ocelí pro energetiku.
[Hybrid laser-MIG welding of steels for the energy industry.]
Technická konference 2023. Certifikace a inspekce pro posuzování shody, bezpečnost, životnost a spolehlivost výrobků a technických zařízení. Brno: TESYDO, 2023, č. článku 008. ISBN 978-80-87102-38-1.
[Technická konference 2023. Brno (CZ), 18.09.2023-19.09.2023]
Institucionální podpora: RVO:68081731
Klíčová slova: laser welding * hybrid welding * creep-resistant steel * weld metal * chemical homogeneity
Obor OECD: Mechanical engineering
Trvalý link: https://hdl.handle.net/11104/0351217 - 9.0583138 - ÚFM 2025 RIV CH eng J - Článek v odborném periodiku
Jurči, P. - Dlouhý, Ivo
Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance.
Materials. Roč. 17, č. 3 (2024), č. článku 548. E-ISSN 1996-1944
Grant CEP: GA MŠMT(CZ) EF16_025/0007304
Institucionální podpora: RVO:68081723
Klíčová slova: 1.2080 tool steel * hot die steel * dry sliding wear * high-speed steel * iron-carbon martensite * chromium cast irons * aisi d2 steel * heat-treatment * retained austenite * vanadis 6 * steels * martensite * retained austenite * cryogenic treatment * carbides * microstructure * mechanical properties * wear performance * corrosion performance
Obor OECD: Materials engineering
Impakt faktor: 3.4, rok: 2022
Způsob publikování: Open access
https://www.mdpi.com/1996-1944/17/3/548
Trvalý link: https://hdl.handle.net/11104/0352698 - 10.0583056 - ÚPT 2025 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Šebestová, Hana - Horník, Petr - Mika, Filip - Mikmeková, Šárka - Ambrož, Ondřej - Mrňa, Libor
Microstructure modifications of Al-Si-coated press-hardened steel 22MnB5 by laser welding.
METAL 2023. 32nd International Conference on Metallurgy and Materials. Conference Proceedings. Ostrava: TANGER, 2024, s. 302-307. ISBN 978-80-88365-12-9. ISSN 2694-9296.
[METAL 2023. International Conference on Metallurgy and Materials /32./. Brno (CZ), 17.05.2023-19.05.2023]
Grant CEP: GA TA ČR(CZ) FW01010293
Grant ostatní: AV ČR(CZ) StrategieAV21/17
Program: StrategieAV
Institucionální podpora: RVO:68081731
Klíčová slova: laser welding * high-strength steel * microstructure * heat input * ferrite stabilization
Obor OECD: Mechanical engineering
https://www.confer.cz/metal/2023/4646-microstructure-modifications-of-al-si-coated-press-hardened-steel-22mnb5-by-laser-welding
Trvalý link: https://hdl.handle.net/11104/0351050