Počet záznamů: 1
Comprehensive study on mechanical properties of lime-based pastes with additions of metakaolin and brick dust
- 1.
SYSNO ASEP 0429333 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název Comprehensive study on mechanical properties of lime-based pastes with additions of metakaolin and brick dust Tvůrce(i) Nežerka, V. (CZ)
Slížková, Zuzana (UTAM-F) RID, SAI, ORCID
Tesárek, P. (CZ)
Plachý, T. (CZ)
Frankeová, Dita (UTAM-F) RID, SAI, ORCID
Petráňová, Veronika (UTAM-F) RID, SAICelkový počet autorů 6 Zdroj.dok. Cement and Concrete Research. - : Elsevier - ISSN 0008-8846
Roč. 64, October (2014), s. 17-29Poč.str. 13 s. Forma vydání Tištěná - P Jazyk dok. eng - angličtina Země vyd. GB - Velká Británie Klíč. slova microstructure ; mechanical properties ; CaO ; metakaolin ; brick dust Vědní obor RIV AL - Umění, architektura, kulturní dědictví CEP DF11P01OVV008 GA MK - Ministerstvo kultury UT WOS 000340304500003 EID SCOPUS 84903988153 DOI 10.1016/j.cemconres.2014.06.006 Anotace In order to understand the behavior of lime-based mortars, and to identify the influence of pozzolans, it is important to investigate the microstructure and properties of lime-based pastes without any aggregates. In our work, nine different sets of pastes with additions of metakaolin and brick dust were studied. The chemical composition and microstructure were investigated by means of TGA, SEM–BSE microscopy and EDX analysis. The mechanical strength and fracture properties were determined from destructive tests, while the evolution of the Young's modulus was monitored using the resonance method. The study revealed that metakaolin exhibits much stronger pozzolanic activity than brick dust, and that the mechanical properties of pastes are not necessarily enhanced by the addition of pozzolans. However, the shrinkage reduction should result in the elimination of cracking around aggregates in mortars. These information contribute to better understanding of lime-based mortars and are essential for their proper modeling and design. Pracoviště Ústav teoretické a aplikované mechaniky Kontakt Kulawiecová Kateřina, kulawiecova@itam.cas.cz, Tel.: 225 443 285 Rok sběru 2015 Elektronická adresa https://doi.org/10.1016/j.cemconres.2014.06.006
Počet záznamů: 1