Počet záznamů: 1
Response of PDPA to optical materials and thickness of test section window
- 1.
SYSNO ASEP 0564313 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název Response of PDPA to optical materials and thickness of test section window Tvůrce(i) Kumar, Si. (IN)
Mishra, Gaurav (UCHP-M)
Kumar, M. (IN)
Dwivedi, A. K. (IN)
Saud, T. (IN)
Khan, A. (IN)
Sapra, B. K. (IN)
Kumar, S. (IN)
Tripathi, S. N. (IN)Číslo článku 111317 Zdroj.dok. Measurement. - : Elsevier - ISSN 0263-2241
Roč. 197, JUN 30 (2022)Poč.str. 10 s. Jazyk dok. eng - angličtina Země vyd. GB - Velká Británie Klíč. slova pdpa ; data rate ; mdg ; thickness Obor OECD Electrical and electronic engineering Způsob publikování Open access s časovým embargem (01.07.2024) Institucionální podpora UCHP-M - RVO:67985858 UT WOS 000882954400002 EID SCOPUS 85130348148 DOI 10.1016/j.measurement.2022.111317 Anotace The objective of this work is to study the response of phase calibrated Phase Doppler Particle Analyser (PDPA) in presence of various arrangement schemes of optical materials and thickness of the test section window. The standard Mono sized droplet generator (MDG) has been used as a source of mono sized droplets stream. Receiving optics collection angle, Bandpass filter, and Photo-multiplier tube (PMT) voltage has been optimized using a known mono-size droplet stream. The results indicate that maximum perturbation in response occurs in presence of 17.5 mm Plexiglas thickness. The reduction in 97% of data rate is noted in Scheme B, whereas no data has been observed for the case of Scheme D. The maximum data rate reduction of 15.9% is observed in 17.5 mm Plexiglas of Scheme D for aligned PDPA subsystem. The results of the experiment also reveal that when unpolished glass is used instead of Plexiglas, the maximum date rate reduction is 70% for 17.5 mm for Scheme D whereas when subsystems are aligned then maximum loss of data rate is 11.3%, which are significantly higher to losses due to Plexiglas. Pracoviště Ústav chemických procesů Kontakt Eva Jirsová, jirsova@icpf.cas.cz, Tel.: 220 390 227 Rok sběru 2023 Elektronická adresa https://hdl.handle.net/11104/0336171
Počet záznamů: 1