Počet záznamů: 1
Study of secondary phases in trip steel by advanced sem and afm techniques
- 1.
SYSNO ASEP 0536989 Druh ASEP C - Konferenční příspěvek (mezinárodní konf.) Zařazení RIV D - Článek ve sborníku Název Study of secondary phases in trip steel by advanced sem and afm techniques Tvůrce(i) Mikmeková, Šárka (UPT-D) RID, SAI, ORCID
Ambrož, Ondřej (UPT-D) ORCID, RID, SAI
Hegrová, J. (CZ)
Aoyama, T. (JP)Celkový počet autorů 4 Zdroj.dok. METAL 2020. 29th International Conference on Metallurgy and Materials. Proceedings. - Ostrava : TANGER, 2020 - ISSN 2694-9296 - ISBN 978-80-87294-97-0 Rozsah stran s. 533-538 Poč.str. 6 s. Forma vydání Tištěná - P Akce METAL 2020. International Conference on Metallurgy and Materials /29./ Datum konání 20.05.2020 - 22.05.2020 Místo konání Brno Země CZ - Česká republika Typ akce WRD Jazyk dok. eng - angličtina Země vyd. CZ - Česká republika Klíč. slova TRIP steel ; advanced SEM ; metallography Vědní obor RIV JA - Elektronika a optoelektronika, elektrotechnika Obor OECD Materials engineering CEP TN01000008 GA TA ČR - Technologická agentura ČR Institucionální podpora UPT-D - RVO:68081731 UT WOS 000794331100085 EID SCOPUS 85096802218 DOI 10.37904/metal.2020.3516 Anotace The paper aims to demonstrate a modern scanning electron microscope (SEM) as a powerful tool for visualization of the secondary phases in TRIP steel. The TRIP steel specimens prepared by various metallographic techniques were imaged by the SEM and the secondary phases presence was confirmed by an electron back-scattered diffraction (EBSD) technique. The chemical polishing by 5 % HF in H2O2 for 10 seconds results in selective etching for each individual phase, as confirmed by an atomic force microscopy (AFM) and hybrid AFM-in-SEM techniques. The phases are easily distinguishable in the SEM micrographs created by the low energy high take-off angle signal electrons. The proposed sample preparation technique together with special SEM imaging conditions enables us accurate analysis of distribution of secondary phases within the TRIP steel matrix and moreover, the retained austenite is distinguishable from the martensite phase. Pracoviště Ústav přístrojové techniky Kontakt Martina Šillerová, sillerova@ISIBrno.Cz, Tel.: 541 514 178 Rok sběru 2021
Počet záznamů: 1