Počet záznamů: 1
Rock Bolting at the Room and Pillar Method at Great Depths
- 1.
SYSNO ASEP 0475743 Druh ASEP C - Konferenční příspěvek (mezinárodní konf.) Zařazení RIV D - Článek ve sborníku Název Rock Bolting at the Room and Pillar Method at Great Depths Tvůrce(i) Waclawik, Petr (UGN-S) RID
Šňupárek, Richard (UGN-S) RID
Kukutsch, Radovan (UGN-S) RID, ORCIDCelkový počet autorů 3 Zdroj.dok. Procedia Engineering - ISRM European Rock Mechanics Symposium EUROCK 2017. - Amsterdam : Elsevier Ltd., 2017 / Koníček P. ; Souček K. ; Konečný P. - ISSN 1877-7058 Rozsah stran s. 575-582 Poč.str. 8 s. Forma vydání Online - E Akce ISRM European Rock Mechanics Symposium EUROCK 2017 Datum konání 20.06.2017 - 23.06.2017 Místo konání Ostrava Země CZ - Česká republika Typ akce WRD Jazyk dok. eng - angličtina Země vyd. NL - Nizozemsko Klíč. slova bolting ; monitoring ; room and pillar Vědní obor RIV DH - Báňský průmysl vč. těžby a zpracování uhlí Obor OECD Mining and mineral processing CEP LO1406 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy ED2.1.00/03.0082 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy Institucionální podpora UGN-S - RVO:68145535 UT WOS 000416996000074 DOI https://doi.org/10.1016/j.proeng.2017.05.220 Anotace A part of the coal reserves in the Karvina subbasin of the Upper Silesian Coal Basin is situated in protection pillars that lie under built-up areas. The longwall mining method is not suitable in these areas because significant deformation of the surface is not allowed. The room and pillar method with stable coal pillars has been proposed to minimise strata convergence. The method has been examined within the shaft protective pillar located in CSM-North Mine coal seam No. 30, where the mining depth ranged from 700 to 900 meters, being perhaps the deepest room and pillar panel in coal mining in the world [1–5]. As there is no relevant experience of using this method in the Upper Silesian Coal Basin, an extensive monitoring system has been implemented to enable the mining trial to continue safely. The monitoring is focused on the load-bearing capacity of the coal pillars and strata deformation changes induced by the room and pillar mining method. Precise monitoring was carried out in two adjacent coal pillars located within the row of pillars forming the panel. To monitor roof deformation, fourteen pairs of 5level multipoint extensometers monitored roof displacements and eleven strain-gauged rockbolts were installed at various locations. Seven hydraulic dynamometer load cells measured the cable bolt loads were installed at the roadway intersections around the monitored pillars. The integral constituent of the extraction method (using driving machines like the Bolter Miner) is bolting as the sole support system of the roadways. The contribution deals with the behaviour of roof bolting, including the loading of the bolts, yielding of the rock mass and convergence in the roadways. The monitored parameters´ database used to measure whether the room and pillar method is successful at this depth forms a necessary condition for verification of this method and its future application in conditions experienced in Upper Silesian Coal Basin. Pracoviště Ústav geoniky Kontakt Lucie Gurková, lucie.gurkova@ugn.cas.cz, Tel.: 596 979 354 Rok sběru 2018 Elektronická adresa http://www.sciencedirect.com/science/article/pii/S1877705817323603
Počet záznamů: 1