Počet záznamů: 1
Compaction of lithium-silicate ceramics using spark plasma sintering
- 1.
SYSNO ASEP 0474254 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název Compaction of lithium-silicate ceramics using spark plasma sintering Tvůrce(i) Kubatík, Tomáš František (UFP-V)
Lukáč, František (UFP-V) ORCID
Mušálek, Radek (UFP-V) RID, ORCID
Brožek, Vlastimil (UFP-V) RID
Stehlíková, K. (CZ)
Chráska, Tomáš (UFP-V) RID, ORCIDZdroj.dok. Ceramics - Silikáty. - : University of Chemistry and Technology Prague - ISSN 0862-5468
Roč. 61, č. 1 (2017), s. 40-44Poč.str. 5 s. Forma vydání Tištěná - P Jazyk dok. eng - angličtina Země vyd. CZ - Česká republika Klíč. slova Li2Si2O5 ; Li2SiO3 ; Spark plasma sintering (SPS) ; Quantitative Rietveld refinement ; X-ray diffraction (XRD) Vědní obor RIV JG - Hutnictví, kovové materiály Obor OECD Materials engineering CEP GB14-36566G GA ČR - Grantová agentura ČR Institucionální podpora UFP-V - RVO:61389021 UT WOS 000397378500007 EID SCOPUS 85015946265 DOI 10.13168/cs.2016.0058 Anotace This paper deals with the compaction of ceramics based on lithium -silicate by spark plasma sintering (SPS). The initial powder was prepared by calcination in a resistance furnace at a temperature of 1300 degrees C with the ratio of Li/Si = I. Compacting by SPS was carried out at temperatures of 800 - 1000 degrees C with a maximum pressure of 80 ILIPa. Samples with open porosity of less than 1 % were prepared at the temperature of 1000 degrees C. According to the quantitative Rietveld refinement of x-ray diffraction data, the dominant phases in all samples were Li2SiO5 and Li2SiO3, together representing over 80 wt. % of the sintered material. Pracoviště Ústav fyziky plazmatu Kontakt Vladimíra Kebza, kebza@ipp.cas.cz, Tel.: 266 052 975 Rok sběru 2018
Počet záznamů: 1