Počet záznamů: 1
On the control of deposition process for enhanced mechanical properties of nc-TiC/a-C: H coatings with DC magnetron sputtering at low or high ion flux
- 1.
SYSNO ASEP 0431164 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název On the control of deposition process for enhanced mechanical properties of nc-TiC/a-C: H coatings with DC magnetron sputtering at low or high ion flux Tvůrce(i) Souček, P. (CZ)
Schmidtová, T. (CZ)
Zábranský, L. (CZ)
Buršíková, V. (CZ)
Vašina, P. (CZ)
Caha, O. (CZ)
Buršík, Jiří (UFM-A) RID, ORCID
Peřina, Vratislav (UJF-V) RID
Mikšová, Romana (UJF-V) RID, ORCID, SAI
Pei, Y. (NL)
de Hosson, J. T. M. (NL)Celkový počet autorů 11 Zdroj.dok. Surface and Coatings Technology. - : Elsevier - ISSN 0257-8972
Roč. 255, 25 September (2014), s. 8-14Poč.str. 7 s. Jazyk dok. eng - angličtina Země vyd. CH - Švýcarsko Klíč. slova enhanced mechanical properties ; ion flux on the substrate ; magnetron sputtering Vědní obor RIV BL - Fyzika plazmatu a výboje v plynech Institucionální podpora UFM-A - RVO:68081723 ; UJF-V - RVO:61389005 UT WOS 000343348800003 DOI 10.1016/j.surfcoat.2013.11.001 Anotace Abstract Nanocomposite coatings consisting of nanocrystallites embedded in an amorphous matrix can be tailored to exhibit unusual combination of properties such as high hardness and modulus combined with low friction and wear. The properties of the coatings are governed by parameters of the deposition plasma, which are a nontrivial function of the deposition process parameters. Energy flux onto the growing films provided by ionized species is one of the key parameters influencing the properties of coatings. This study is focused on the influence of ion flux on the properties of the growing nc-TiC/a-C:H thin film in order to achieve enhanced mechanical properties. Two different magnetic field configurations were used. The saturated ion current on the substrate was found to be seven times higher in the strongly unbalanced magnetic configuration as compared to well-balanced configuration. The deposition temperature was constant at ~. 320. °C, which is higher than the usual temperature for similar depositions of nc-TiC/a-C(:H) coatings. The structure and mechanical properties of the coatings prepared at low or high ion flux were studied and compared. Pracoviště Ústav fyziky materiálu Kontakt Yvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485 Rok sběru 2015
Počet záznamů: 1