Počet záznamů: 1
High-temperature and low-stress creep anisotropy of single-crystal superalloys
- 1.
SYSNO ASEP 0398847 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název High-temperature and low-stress creep anisotropy of single-crystal superalloys Tvůrce(i) Jacome, L. A. (DE)
Nortershauser, P. (DE)
Heyer, J. K. (DE)
Lahni, A. (DE)
Frenzel, J. (DE)
Dlouhý, Antonín (UFM-A) RID, ORCID
Somsen, C. (DE)
Eggeler, G. (DE)Celkový počet autorů 8 Zdroj.dok. Acta Materialia. - : Elsevier - ISSN 1359-6454
Roč. 61, č. 8 (2013), s. 2926-2943Poč.str. 18 s. Jazyk dok. eng - angličtina Země vyd. GB - Velká Británie Klíč. slova superalloy single crystals ; creep anisotropy ; rafting ; dislocations ; deformation mechanisms Vědní obor RIV BM - Fyzika pevných látek a magnetismus CEP GA202/09/2073 GA ČR - Grantová agentura ČR Institucionální podpora UFM-A - RVO:68081723 UT WOS 000317797700019 DOI 10.1016/j.actamat.2013.01.052 Anotace The high-temperature and low-stress creep (1293 K, 160 MPa) of the single-crystal Ni-based superalloy LEK 94 is investigated, comparing the tensile creep behavior of miniature creep specimens in [0 0 1] and [1 1 0] directions. In the early stages of creep, the [0 0 1]-direction loading shows higher minimum creep rates, because a greater number of microscopic crystallographic slip systems are activated, the dislocation networks at gamma/gamma' interfaces accommodate lattice misfit better, and gamma channels are wider. After the creep rate minimum, creep rates increase more strongly as a function of strain for [1 1 0] tensile loading. This may be related to the nature of rafting during [1 1 0] tensile creep, which results in a more open topology of the gamma channels. It may also be related to more frequent gamma' cutting events compared with [1 0 0] tensile creep. Pracoviště Ústav fyziky materiálu Kontakt Yvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485 Rok sběru 2014
Počet záznamů: 1