Počet záznamů: 1  

The applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades

  1. 1.
    SYSNO ASEP0398693
    Druh ASEPJ - Článek v odborném periodiku
    Zařazení RIVJ - Článek v odborném periodiku
    Poddruh JČlánek ve WOS
    NázevThe applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades
    Tvůrce(i) Nezbedová, E. (CZ)
    Hutař, Pavel (UFM-A) RID, ORCID
    Zouhar, Michal (UFM-A)
    Knésl, Zdeněk (UFM-A)
    Sadílek, J. (CZ)
    Náhlík, Luboš (UFM-A) RID, ORCID
    Celkový počet autorů6
    Zdroj.dok.Polymer Testing. - : Elsevier - ISSN 0142-9418
    Roč. 32, č. 1 (2013), s. 106-114
    Poč.str.9 s.
    Jazyk dok.eng - angličtina
    Země vyd.GB - Velká Británie
    Klíč. slovaPENT test ; Lifetime prediction ; HDPE ; Slow crack growth ; Fracture mechanics
    Vědní obor RIVJL - Únava materiálu a lomová mechanika
    CEPGAP108/12/1560 GA ČR - Grantová agentura ČR
    ED1.1.00/02.0068 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    Institucionální podporaUFM-A - RVO:68081723
    UT WOS000314448100016
    DOI10.1016/j.polymertesting.2012.09.009
    AnotaceThe failure mode termed long time brittle failure (due to slow crack growth – SCG) limits the lifetime of plastic pipes. There are now two main accelerated tests (PENT and FNCT) that enable us to estimate the lifetime of HDPE used in plastics pipes. For unimodal grades, the time to failure corresponding to these accelerated tests is about ten hours, for bimodal grade PE 100 it is roughly a thousand hours and for the new PE 100 RC grade is greater than 1 year. For the HDPE pipes grade with higher resistance against SCG, some modification or, alternatively, new tests should be developed that make it possible even for these materials to obtain the results required in a relatively short time. In this contribution we focus mainly on the PENT test and the possibility of the utilization of a structural analysis as well as a numerical approach for prediction of the lifetime of a new generation of PE grades.
    PracovištěÚstav fyziky materiálu
    KontaktYvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485
    Rok sběru2014
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.