Počet záznamů: 1  

Microstructure Stability and Creep Behaviour of a Cu-0.2wt.%Zr Alloy Processed by Equal-Channel Angular Pressing

  1. 1.
    SYSNO ASEP0359792
    Druh ASEPJ - Článek v odborném periodiku
    Zařazení RIVJ - Článek v odborném periodiku
    Poddruh JČlánek ve WOS
    NázevMicrostructure Stability and Creep Behaviour of a Cu-0.2wt.%Zr Alloy Processed by Equal-Channel Angular Pressing
    Tvůrce(i) Dvořák, Jiří (UFM-A) RID, ORCID
    Král, Petr (UFM-A) RID, ORCID
    Kvapilová, Marie (UFM-A) RID, ORCID
    Svoboda, Milan (UFM-A) RID, ORCID
    Sklenička, Václav (UFM-A) RID, ORCID
    Celkový počet autorů5
    Zdroj.dok.Materials Science Forum - ISSN 0255-5476
    667-669, - (2011), s. 821-826
    Poč.str.6 s.
    AkceNanoSPD5 - International Conference on Nanomaterials by Severe Plastic Deformation /5./
    Datum konání21.03.2011-25.03.2011
    Místo konáníNanjing
    ZeměCN - Čína
    Typ akceWRD
    Jazyk dok.eng - angličtina
    Země vyd.CH - Švýcarsko
    Klíč. slovacopper alloy ; creep ; equal-channel angular pressing (ECAP) ; precipitation-strengthened alloy
    Vědní obor RIVJR - Ostatní strojírenství
    CEZAV0Z20410507 - UFM-A (2005-2011)
    UT WOS000299234300136
    DOI10.4028/www.scientific.net/MSF.667-669.821
    AnotaceA dispersion-strengthened Cu-0.2 wt.% Zr alloy was subjected to ECAP at room temperature for up to 12 passes through route BC. The microstructural investigations were performed using both TEM and SEM. Tensile creep tests were conducted at temperature 673 K and at the applied stress in the range from 80 to 180 MPa. The migration of boundaries and subsequent grain growth were restricted by Cu9Zr2 precipitates. The study was performed in order to evaluate the effects of severe plastic deformation and precipitation on creep behaviour and microstructure of the pressed alloy. It was found that creep behaviour is strongly dependent on number of ECAP passes. The pressed alloy after up to 4 ECAP passes exhibited a considerable improvement in creep properties in comparison with the unpressed alloy.
    PracovištěÚstav fyziky materiálu
    KontaktYvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485
    Rok sběru2012
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.