Počet záznamů: 1  

Influence of niobium alloying on the low cycle fatigue of cast TiAl alloys at room and high temperatures

  1. 1.
    SYSNO ASEP0346327
    Druh ASEPJ - Článek v odborném periodiku
    Zařazení RIVJ - Článek v odborném periodiku
    Poddruh JČlánek ve WOS
    NázevInfluence of niobium alloying on the low cycle fatigue of cast TiAl alloys at room and high temperatures
    Tvůrce(i) Kruml, Tomáš (UFM-A) RID, ORCID
    Petrenec, Martin (UFM-A)
    Obrtlík, Karel (UFM-A) RID, ORCID
    Polák, Jaroslav (UFM-A) RID, ORCID
    Buček, Petr (UFM-A)
    Celkový počet autorů5
    Zdroj.dok.Procedia Engineering. - Amsterdam : Elsevier BV
    Roč. 2, č. 1 (2010), s. 2297-2305
    Poč.str.9 s.
    AkceFatigue 2010
    Datum konání06.06.2010-11.06.2010
    Místo konáníPraha
    ZeměCZ - Česká republika
    Typ akceWRD
    Jazyk dok.eng - angličtina
    Země vyd.NL - Nizozemsko
    Klíč. slovaLow cycle fatigue ; lamellar TiAl alloy ; fracture surface
    Vědní obor RIVJL - Únava materiálu a lomová mechanika
    CEPGA106/08/1631 GA ČR - Grantová agentura ČR
    GA106/07/0762 GA ČR - Grantová agentura ČR
    CEZAV0Z20410507 - UFM-A (2005-2011)
    UT WOS000278762900244
    AnotaceThe low-cycle fatigue properties of TiAl alloys with 2 at.% and 7 at.% of Nb with nearly lamellar microstructure were studied at room temperature and 750 degrees C. Cyclic hardening/softening curves, cyclic stress-strain curves (CSSC) and fatigue life curves were obtained at both temperatures as well as monotonic tensile properties. Both materials show stable cyclic response at 750 degrees C. At room temperature, significant cyclic hardening characteristic for 2 at.% Nb alloy is not observed for 7 at.% Nb alloy. This difference is attributed to higher Nb content which increases the stacking fault energy and thus prevents intensive twinning. Parameters of the CSSC, the Manson-Coffin law and the Basquin law were determined. The cyclic strength of the alloy with 7 at.% Nb is substantially higher in comparison with 2 at.% Nb, probably due to lower thickness of the lamellas.
    PracovištěÚstav fyziky materiálu
    KontaktYvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485
    Rok sběru2011
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.