Počet záznamů: 1  

Influence of the pre-exposure of a Zn-0.8Mg-0.2Sr absorbable alloy in bovine serum albumin containing media on its surface changes and their impact on the cytocompatibility of the material

  1. 1.
    SYSNO ASEP0549692
    Druh ASEPJ - Článek v odborném periodiku
    Zařazení RIVJ - Článek v odborném periodiku
    Poddruh JČlánek ve WOS
    NázevInfluence of the pre-exposure of a Zn-0.8Mg-0.2Sr absorbable alloy in bovine serum albumin containing media on its surface changes and their impact on the cytocompatibility of the material
    Tvůrce(i) Pinc, Jan (FZU-D) ORCID
    Španko, M. (CZ)
    Lacina, L. (CZ)
    Kubásek, J. (CZ)
    Ashcheulov, Petr (FZU-D) ORCID, RID
    Veřtát, Petr (FZU-D) RID, ORCID
    Školáková, Andrea (FZU-D) ORCID
    Kvítek, O. (CZ)
    Vojtěch, D. (CZ)
    Čapek, Jaroslav (FZU-D) ORCID
    Celkový počet autorů10
    Číslo článku102556
    Zdroj.dok.Materials Today Communications. - : Elsevier - ISSN 2352-4928
    Roč. 28, Sept. (2021)
    Poč.str.13 s.
    Jazyk dok.eng - angličtina
    Země vyd.NL - Nizozemsko
    Klíč. slovazinc ; absorbable metals ; in vitro ; surface properties ; bovine serum albumin
    Vědní obor RIVJG - Hutnictví, kovové materiály
    Obor OECDCoating and films
    CEPEF16_019/0000760 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    GA18-06110S GA ČR - Grantová agentura ČR
    Způsob publikováníOmezený přístup
    Institucionální podporaFZU-D - RVO:68378271
    UT WOS000697187300005
    EID SCOPUS85111047283
    DOI https://doi.org/10.1016/j.mtcomm.2021.102556
    Anotacen this study, the ternary alloy ZnMg0.8Sr0.2 (wt%) was pre-exposed in a phosphate buffer solution (PBS) with and without the addition of 1 wt% of bovine serum albumin (BSA) to simulate the early stage of the post- implantation period. We investigated the influence of the presence of BSA in the pre-exposure medium on surface chemistry, roughness topography and cytotoxicity of the pre-exposed materials. This study revealed that the pre-exposure in PBS with the addition of BSA induces the formation of a relatively thick and compact phosphate layer on the sample surface. In contrast, the majority of the surface of the samples pre-exposed in pure PBS appear almost untouched, and only a few small areas covered by eye-visible corrosion products were observed. This resulted in lower ion release (66 μmol/L) and a consequent decrease of the cytotoxicity of the eluates prepared from the samples pre-exposed in the BSA containing media. Together with the knowledge available from the literature, the obtained results indicate that BSA affects the degradation mechanism of the Zn- based alloy, resulting in the formation of zinc-BSA complexes. These complexes stimulate the precipitation of phosphates and a consequent formation of solid corrosion products with a protective function. This partially mimics the surface changes occurring in the early post-implantation period. The aforementioned suggests that a suitable pre-exposure of Zn-based absorbable materials in a protein containing media could be used as an approach to obtain reliable data about cytocompatibility by in vitro tests and reduce the discrepancies with the results obtained in vivo.
    PracovištěFyzikální ústav
    KontaktKristina Potocká, potocka@fzu.cz, Tel.: 220 318 579
    Rok sběru2022
    Elektronická adresahttps://doi.org/10.1016/j.mtcomm.2021.102556
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.