0452227 - ÚGN 2016 RIV RS eng C - Konferenční příspěvek (zahraniční konf.)
Cárach, J. - Hloch, Sergej
Machining of materials by abrasive water jet turning with the proposal of on-line monitoring using acoustic emission.
International Scientific and Expert Conference TEAM 2015 /7./. Belgrade: TEAM International Society, Faculty of Mechanical Engineering, University of Belgrade, 2015 - (Sedmak, A.), s. 317-319. ISBN 978-86-7083-877-2.
[International Scientific and Expert Conference TEAM 2015 /7./. Belgrade (RS), 15.10.2015-16.10.2015]
Grant CEP: GA MŠMT ED2.1.00/03.0082; GA MŠMT(CZ) LO1406
Institucionální podpora: RVO:68145535
Klíčová slova: abrasive water jet * work-piece * turning * titanium * hydrophone
Kód oboru RIV: JQ - Strojní zařízení a nástroje
http://johanyak.hu/files/u1/publi/G_J_Survey_on_Intrusion_TEAM_2015.pdf

The paper deals with increasing the feed speed influence on the quality of machined surface of work-piece using the technology of abrasive water jet turning, and the proposal of on-line monitoring of the process using acoustic emission. Titanium materials of degree 3 (diameter of work-piece dw = 46 mm) and Incoloy 925 alloy (diameter of workpiece dw=53 mm. The experiment was implemented using continuous abrasive water jet (Australian garnet, MESH = 80) with working water pressure p = 400 MPa. Rotation speed was the same for both experiments, and was adjusted to the value n = 34 RPM. Feed speed (vf = 1.5 – 7.5 mm.min-1) was gradually changed at the constant cut depth ap = 2 mm. Visualization of the machined surface was implemented using the Olympus LEXT OLS 3100 laser co focal microscope. Roughness parameters (Ra, Rq, Rz) were measured using the MicroPro FRT optical profilometer.
Trvalý link: http://hdl.handle.net/11104/0253262