Počet záznamů: 1  

Digital System for Keeping Optical Frequency Comb in Long- Term Stable Operation

  1. 1.
    SYSNO ASEP0436829
    Druh ASEPC - Konferenční příspěvek (mezinárodní konf.)
    Zařazení RIVD - Článek ve sborníku
    NázevDigital System for Keeping Optical Frequency Comb in Long- Term Stable Operation
    Tvůrce(i) Čížek, Martin (UPT-D) RID, ORCID, SAI
    Šmíd, Radek (UPT-D) RID, SAI
    Hucl, Václav (UPT-D) RID, ORCID, SAI
    Lazar, Josef (UPT-D) RID, ORCID, SAI
    Číp, Ondřej (UPT-D) RID, SAI, ORCID
    Celkový počet autorů5
    Zdroj.dok.28th European Frequency and Time Forum (EFTF 2014). - Piscataway : IEEE, 2014 - ISBN 978-1-4799-5252-6
    Rozsah strans. 193-195
    Poč.str.3 s.
    Forma vydáníOnline - E
    AkceEFTF 2014. European Frequency and Time Forum /28./
    Datum konání23.07.2014-26.07.2014
    Místo konáníNeuchatel
    ZeměCH - Švýcarsko
    Typ akceWRD
    Jazyk dok.eng - angličtina
    Země vyd.US - Spojené státy americké
    Klíč. slovaoptical frequency comb ; long-term operation ; stabilization ; digital signal processing
    Vědní obor RIVBH - Optika, masery a lasery
    Obor OECDOptics (including laser optics and quantum optics)
    CEPGAP102/10/1813 GA ČR - Grantová agentura ČR
    LO1212 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    ED0017/01/01 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    EE2.4.31.0016 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    Institucionální podporaUPT-D - RVO:68081731
    UT WOS000392736300052
    EID SCOPUS84971451013
    AnotaceA passive optical resonator is a special sensor used for measurement of lengths on the nanometer and sub-nanometer scale. A stabilized optical frequency comb can provide an ultimate reference for measuring the wavelength of a tunable laser locked to the optical resonator. If we lock the repetition and offset frequencies of the comb to a high-grade radiofrequency (RF) oscillator its relative frequency stability is transferred from the RF to the optical frequency domain. Experiments in the field of precise length metrology of low-expansion materials are usually of long-term nature so it is required that the optical frequency comb stays in operation for an extended period of time. The optoelectronic closed-loop systems used for stabilization of combs are usually based on conventional analog electronic circuits processing signals from photodetectors. From an experimental point of view, these setups are very complicated and sensitive to ambient conditions and disturbances, especially in the optical part, therefore maintaining long-time operation is not easy. The presented work deals with a novel approach based on digital signal processing and software-defined radio algorithms. We are using a twostage stabilization scheme. A frequency-locked loop (FLL) pre-stabilizes the offset frequency and steers it into the capture range of a phase-locked loop (PLL) that consequently takes control. Such combination of FLL and PLL together with additional control logics is also able to handle situations when the PLL unexpectedly goes out of lock and so it is capable of keeping the optical frequency comb in a long-time stable operation. The stability of the resulting system was investigated. Allan deviations from data measured during 8 days of operation were computed. The resulting long-term stability of the setup is better than 1.6 x 10−11.
    PracovištěÚstav přístrojové techniky
    KontaktMartina Šillerová, sillerova@ISIBrno.Cz, Tel.: 541 514 178
    Rok sběru2015
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.