Počet záznamů: 1
Laminated alumina/zirconia ceramic composites prepared by electrophoretic
- 1.
SYSNO ASEP 0385457 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název Laminated alumina/zirconia ceramic composites prepared by electrophoretic Tvůrce(i) Hadraba, Hynek (UFM-A) RID, ORCID
Drdlík, D. (CZ)
Chlup, Zdeněk (UFM-A) RID, ORCID
Maca, K. (CZ)
Dlouhý, Ivo (UFM-A) RID, ORCID
Cihlář, J. (CZ)Celkový počet autorů 6 Zdroj.dok. Journal of the European Ceramic Society. - : Elsevier - ISSN 0955-2219
Roč. 32, č. 9 (2012), s. 2053-2056Poč.str. 4 s. Akce Engineering Ceramics 2011 - from Materials to Components Datum konání 09.05.2011-12.05.2011 Místo konání Smolenice Země SK - Slovensko Typ akce WRD Jazyk dok. eng - angličtina Země vyd. GB - Velká Británie Klíč. slova electrophoretic deposition ; composites ; hardness ; Al2O3 ; ZrO2 Vědní obor RIV JH - Keramika, žáruvzdorné materiály a skla CEP GAP108/11/1644 GA ČR - Grantová agentura ČR Institucionální podpora UFM-A - RVO:68081723 CEZ AV0Z20410507 - UFM-A (2005-2011) UT WOS 000303626200028 DOI https://doi.org/10.1016/j.jeurceramsoc.2011.09.004 Anotace The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloracetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 µA to 48 mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia. Pracoviště Ústav fyziky materiálu Kontakt Yvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485 Rok sběru 2013
Počet záznamů: 1