Počet záznamů: 1
Phase and microstructural analysis of hot rolled FeNi42 sheet, its response in magnetic and mechanical properties
- 1.0364005 - ÚFM 2012 RIV DE eng J - Článek v odborném periodiku
Jirásková, Yvonna - Buršík, Jiří - Tuček, J.
Phase and microstructural analysis of hot rolled FeNi42 sheet, its response in magnetic and mechanical properties.
Steel research international. Roč. 82, č. 8 (2011), s. 898-904. ISSN 1611-3683. E-ISSN 1869-344X
Výzkumný záměr: CEZ:AV0Z20410507
Klíčová slova: electron microscopy * hardness * interface * Fe-Ni steel * phase transformation * thermomechanical processing
Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
Impakt faktor: 0.733, rok: 2011
Inclusions unavoidably existing in steels and consequently also in final products obtained by e.g. rolling markedly affects the physical properties. This paper is devoted to investigation of FeNi42 steel hot rolled into a sheet form. The structural and phase analysis is done by scanning electron microscopy, X-ray diffraction, and Mössbauer spectroscopy completed by magnetic and hardness measurements. The results yield an inhomogeneous nickel distribution in the sheet resulting in a formation of the intermetallic Ni3Fe phase. A depletion of sheet surface by nickel leads to an intensive surface oxidation; its thickness increases in the direction of sheet edges. The non-metallic oxide inclusions are concentrated predominantly at grain boundaries, which contribute to an easier cracking. The formation of Ni3Fe affects a small increase in saturation magnetization. The oxides and consequently cracks formation cause magnetic hardening as can be seen on an increase of the structurally sensitive remnant magnetization. The hard oxide inclusions evoke also the hardening of material, rise brittleness and crack liability.
Trvalý link: http://hdl.handle.net/11104/0199602
Počet záznamů: 1