Počet záznamů: 1  

Creep of ex-service 0.5CrMoV steel at low strain rates

  1. 1.
    SYSNO ASEP0323650
    Druh ASEPJ - Článek v odborném periodiku
    Zařazení RIVJ - Článek v odborném periodiku
    Poddruh JOstatní články
    NázevCreep of ex-service 0.5CrMoV steel at low strain rates
    Překlad názvuCreep 0.5CrMoV oceli po průmyslovém použití při malých rychlostech deformace
    Tvůrce(i) Kloc, Luboš (UFM-A) RID, ORCID
    Zdroj.dok.Materials Science and Engineering A Structural Materials Properties Microstructure and Processing. - : Elsevier - ISSN 0921-5093
    510-511, - (2009), s. 70-73
    Poč.str.4 s.
    AkceCreep 2008
    Datum konání04.05.2008-09.05.2008
    Místo konáníBayreuth
    ZeměDE - Německo
    Typ akceWRD
    Jazyk dok.eng - angličtina
    Země vyd.NL - Nizozemsko
    Klíč. slovaResidual creep life ; Low strain creep ; Low alloy steel
    Vědní obor RIVJG - Hutnictví, kovové materiály
    CEP1P05OC006 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    CEZAV0Z20410507 - UFM-A (2005-2011)
    AnotaceHigh sensitivity helicoid spring specimen technique was used to investigate creep response of ex-service low alloy steel. The creep conditions were selected to be close to that under which the material was used, that is 833K and 34MPa. Three specimens were prepared from the segment of main steam pipeline having radial, tangential and axial orientation with respect to original pipeline axis. Results were compared to creep curves obtained on the unused generic low alloy steel under the same conditions. The ex-service steel creeps considerably faster, mainly during the transient period. Unfortunately, the chemical composition of the steel does not match its specification so it is not clear which part of the difference can be attributed to the creep damage. Some differences were observed between different specimen orientation, so the anisotropy introduced by the creep damage can be observed. More experiments are needed to determine potential contribution to the residual life assessment.
    PracovištěÚstav fyziky materiálu
    KontaktYvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485
    Rok sběru2009
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.