Počet záznamů: 1
Nanocrystalline Al7075+1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering.
- 1.0480207 - ÚFP 2018 RIV CH eng J - Článek v odborném periodiku
Molnárová, O. - Málek, P. - Veselý, J. - Šlapáková, M. - Minárik, P. - Lukáč, František - Chráska, Tomáš - Novák, P. - Průša, F.
Nanocrystalline Al7075+1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering.
Materials. Roč. 10, č. 9 (2017), č. článku 1105. E-ISSN 1996-1944
Grant CEP: GA ČR(CZ) GA15-15609S
Institucionální podpora: RVO:61389021
Klíčová slova: gas atomization * mechanical milling * spark plasma sintering * microstructure * microhardness * recrystallization
Obor OECD: Materials engineering
Impakt faktor: 2.467, rok: 2017
http://www.readcube.com/articles/10.3390/ma10091105
The microstructure, phase composition, and microhardness of both gas-atomized and mechanically milled powders of the Al7075 + 1 wt % Zr alloy were investigated. The gas-atomized powder exhibited a cellular microstructure with layers of intermetallic phases along the cell boundaries. Mechanical milling resulted in a grain size reduction to the nanocrystalline range along with an increase of the powder microhardness. Compacts prepared by spark plasma sintering (SPS) exhibited negligible porosity. The grain size of the originally gas-atomized material was retained, but the continuous layers of intermetallic phases were replaced by individual particles. Recrystallization led to a grain size increase in the SPS compact prepared from the originally milled powder. Small precipitates of the Al3Zr phase in the SPS compacts are responsible for the retainment of the sub-microcrystalline microstructure during SPS.
Trvalý link: http://hdl.handle.net/11104/0276078
Počet záznamů: 1