Počet záznamů: 1
Possibilities of using 3D laser scanning in geotechnical practise
- 1.
SYSNO ASEP 0505395 Druh ASEP C - Konferenční příspěvek (mezinárodní konf.) Zařazení RIV D - Článek ve sborníku Název Possibilities of using 3D laser scanning in geotechnical practise Tvůrce(i) Kukutsch, Radovan (UGN-S) RID, ORCID
Kajzar, Vlastimil (UGN-S) RID, ORCID
Šňupárek, Richard (UGN-S) RID
Waclawik, Petr (UGN-S) RIDCelkový počet autorů 4 Zdroj.dok. Proceedings of the 14th International Conference Underground Construction Prague 2019. - Praha : Czech Tunnelling Association ITA-AITES, 2019 - ISBN 978-80-906452-3-3 Poč.str. 8 s. Forma vydání Tištěná - P Akce Podzemní stavby Praha 2019 Datum konání 03.06.2019 - 05.06.2019 Místo konání Praha Země CZ - Česká republika Typ akce EUR Jazyk dok. eng - angličtina Země vyd. CZ - Česká republika Klíč. slova 3D laser scanning ; room and pillar ; roadways deformation Vědní obor RIV DH - Báňský průmysl vč. těžby a zpracování uhlí Obor OECD Mechanical engineering CEP LO1406 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy Institucionální podpora UGN-S - RVO:68145535 Anotace We are experiencing the penetration of modern and smart technologies in all sectors of human activity, including mining and geotechnics. One of these technologies is 3D laser scanning, which has seen significant technological advancements over the last decade and has become an integral part of underground construction monitoring as a tool to enable comprehensive, accurate and unbiased capture of the spatial situation in digital form. This development was behind the fact that since 2013, 3D laser scanner has been used by the Institute of Geonics of the Czech Academy of Sciences as a necessary part of the geotechnical monitoring of mine works, when it is possible to precisely detect and quantify the time-space changes caused by man's intervention in the rock mass compared to the traditional established measuring methods. A leading project of recent years was the monitoring of the strain stress state of the rock massif during the 30th seam extraction during the trial operation of the Room and Pillar extraction method in the CSM Mine shaft safety pillar where, besides many other measuring instruments, 3D laser scanning was used for the convergence measuring of roadways, especially for capturing any deformation changes on the permanent pillars. A complementary function was the comparative evaluation with the results of other tools, e.g. with data measured by horizontal extensometers. The subject of the article will be a general description of the possibilities of using 3D laser scanning in geotechnical practice on spatial data acquired during the monitoring lasting almost 3.5 years, when important phenomena were detected in the movement of the pillar walls and the floor heave in the CSM Mine in the tens of cm, sometimes up to 100 cm. Pracoviště Ústav geoniky Kontakt Lucie Gurková, lucie.gurkova@ugn.cas.cz, Tel.: 596 979 354 Rok sběru 2020
Počet záznamů: 1