Fabrication-tolerant and CMOS-compatible polarization splitter and rotator based on a compact bent-tapered directional coupler

0538976 - FZÚ 2021 RIV US eng J - Článek v odborném periodiku
Zafar, H. - Pereira, Mauro Fernandes - Kennedy, K.L. - Anjum, D.H.
Fabrication-tolerant and CMOS-compatible polarization splitter and rotator based on a compact bent-tapered directional coupler.
AIP Advances. Roč. 10, č. 12 (2020), s. 1-9, č. článku 125214. E-ISSN 2158-3226
Institucionální podpora: RVO:68378271
Klíčová slova: radiowave and microwave technology * waveguides * optical fibers * electric fields * wave propagation * optical phase matching
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 1.548, rok: 2020
Způsob publikování: Open access

In this paper, we demonstrate a broadband, low-loss, compact, and fabrication-tolerant polarization splitter and rotator (PSR) on a siliconon-insulator platform. The PSR is based on an asymmetric directional coupler (ADC), which is covered with SiO2 from the top to make it compatible with the standard metal back end of line (BEOL) process. Conventional ADC-based PSRs suffer from stringent fabrication requirements and relatively low bandwidth, while the proposed bent-tapered design is highly insensitive to the fabrication errors (>70 nm tolerance on the coupling gap) with an enlarged bandwidth and a compact footprint of 53 μm × 7 μm. It yields a polarization conversion loss less than 0.7 dB, a transverse electric (TE) insertion loss better than 0.3 dB, an ultra-low crosstalk with the TE extinction better than 30 dB, and the transverse magnetic extinction better than 25 dB, over a 200 nm wavelength range (1.5 μm–1.7 μm), in both ports. At the 1.55 μm wavelength, the calculated ultra-low polarization conversion loss and TE insertion loss are 0.27 dB and 0.08 dB, respectively.
Trvalý link: http://hdl.handle.net/11104/0316707