Počet záznamů: 1
Mechanical and Fatigue Properties of Diamond-Reinforced Cu and Al Metal Matrix Composites Prepared by Cold Spray
- 1.0555684 - ÚFP 2022 RIV US eng J - Článek v odborném periodiku
Kovařík, O. - Čížek, Jan - Yin, S. - Lupoi, R. - Janovská, Michaela - Čech, J. - Čapek, J. - Siegl, J. - Chráska, Tomáš
Mechanical and Fatigue Properties of Diamond-Reinforced Cu and Al Metal Matrix Composites Prepared by Cold Spray.
Journal of Thermal Spray Technology. Roč. 31, 1-2 (2022), s. 217-233. ISSN 1059-9630. E-ISSN 1544-1016
Grant CEP: GA MŠMT EF16_019/0000778; GA ČR(CZ) GA20-12624S
Institucionální podpora: RVO:61389021 ; RVO:61388998
Klíčová slova: cold spray * processing diamond metal matrix composites, mechanical properties * properties * properties, fatigue * properties, fracture
Obor OECD: Coating and films
Impakt faktor: 3.1, rok: 2022
Způsob publikování: Open access
https://link.springer.com/article/10.1007/s11666-022-01321-3
Diamond-reinforced metal matrix composites (DMMC) prepared by cold spray are emerging materials simultaneously featuring outstanding thermal conductivity and wear resistance. In our paper, their mechanical and fatigue properties relevant to perspective engineering applications were investigated using miniature bending specimens. Two different diamond mass concentrations (20 and 50%) embedded in two metal matrices (Al—lighter than diamond, Cu—heavier than diamond) were compared with the respective cold-sprayed pure metals, as well as bulk Al and Cu references. The pure Al, Cu coatings showed properties typical for cold spray deposits, i.e., decreased elastic moduli (50 GPa for Al, 80 GPa for Cu), limited ductility (< 1 × 10−3) and low fracture toughness (3.8 MPa·m0.5 for Al, 5.6 MPa·m0.5 for Cu) when compared to the bulks. Significantly improved properties (strain at fracture, ultimate strength, fatigue crack growth resistance, fracture toughness) were then observed for the produced DMMC. The improvement can be explained by a combination of two factors: changes in the properties of the metallic matrix triggered by the reinforcement particles peening effect and stress redistribution due to the particles presence.
Trvalý link: http://hdl.handle.net/11104/0330146
Počet záznamů: 1