- Microwave-assisted and conventional synthesis, photophysics and elect…
Počet záznamů: 1  

Microwave-assisted and conventional synthesis, photophysics and electroluminescence of poly(9,9-dihexadecylfluorene-2,7-diyl-alt-2,2′-bithiophene-5,5′-diyl)

  1. 1.
    SYSNO ASEP0484316
    Druh ASEPJ - Článek v odborném periodiku
    Zařazení RIVJ - Článek v odborném periodiku
    Poddruh JČlánek ve WOS
    NázevMicrowave-assisted and conventional synthesis, photophysics and electroluminescence of poly(9,9-dihexadecylfluorene-2,7-diyl-alt-2,2′-bithiophene-5,5′-diyl)
    Tvůrce(i) Dzhabarov, Vagif (UMCH-V) RID
    Výprachtický, Drahomír (UMCH-V) RID, ORCID
    Cimrová, Věra (UMCH-V) RID, ORCID
    Zdroj.dok.European Polymer Journal. - : Elsevier - ISSN 0014-3057
    Roč. 98, January (2018), s. 420-429
    Poč.str.10 s.
    Jazyk dok.eng - angličtina
    Země vyd.GB - Velká Británie
    Klíč. slovadialkylfluorene-bithiophene copolymers ; microwave-assisted heating ; Suzuki coupling
    Vědní obor RIVBM - Fyzika pevných látek a magnetismus
    Obor OECDCondensed matter physics (including formerly solid state physics, supercond.)
    CEPGA13-26542S GA ČR - Grantová agentura ČR
    Institucionální podporaUMCH-V - RVO:61389013
    UT WOS000425561700045
    EID SCOPUS85036456867
    DOI https://doi.org/10.1016/j.eurpolymj.2017.11.043
    AnotaceAlternating electroluminescent copolymers, poly(9,9-dihexadecylfluorene-2,7-diyl-alt-2,2′-bithiophene-5,5′-diyl)s (PFC16BTs), were synthesized using two different routes of Suzuki coupling reaction in which either dibromo derivative of fluorene was reacted with diboronic acid ester of bithiophene or vice versa, with microwave-assisted (MA) or conventional (C) heating in high boiling point solvents, chlorobenzene (CB) and xylene (Xy). PFC16BT copolymers with various molecular weights (MW) were obtained depending on the synthetic conditions, and the influence on MW is discussed. The photophysical and electrochemical properties and the electroluminescence (EL) of the PFC16BT copolymers were studied and compared with those of poly(9,9-dioctylfluorene-2,7-diyl-alt-2,2′-bithiophene-5,5′-diyl)s (PFC8BTs) to reveal the impact of MW and the length of side chains on their properties. A slight dependence on the MW was only observed in the absorption spectra in solutions. Photoluminescence (PL) of PFC16BTs solutions emitted green light with a maximum of approximately 500 nm, whereas the PL emission spectra of thin films were redshifted with the maxima at 540 nm. The ionization potential (HOMO level) and electron affinity (LUMO level) values of 5.4 eV and 2.6 eV, respectively, were evaluated for PFC16BTs, which are similar to those for PFC8BTs. The electrochemical bandgap value of 2.8 eV was higher than the value of the optical bandgap of 2.4 eV. The PFC16BT copolymers with various MW were tested as an active layer in light-emitting devices (LEDs), and the results are compared with those of PFC8BT LEDs. The PFC16BT LEDs exhibited a luminance higher than 3500 cd m-2 and low onset voltages of approximately 2 V. The shape of the EL spectra of LEDs is similar to that of PL spectra of the thin films. PL emission of PFC16BT thin films and EL emission were blue shifted compared with those of PFC8BT, indicating a more pronounced aggregation in PFC8BT.
    PracovištěÚstav makromolekulární chemie
    KontaktEva Čechová, cechova@imc.cas.cz ; Tel.: 296 809 358
    Rok sběru2019
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.