Microstructure and microhardness evaluation fornicraly materials manufactured by spark plasmasintering and plasma spraying

0538127 - ÚFP 2021 RIV CZ eng J - Článek v odborném periodiku
Hulka, Iosif - Mušálek, Radek - Lukáč, František - Klečka, Jakub - Chráska, Tomáš
Microstructure and microhardness evaluation fornicraly materials manufactured by spark plasmasintering and plasma spraying.
Acta Polytechnica. Roč. 27, Červen (2020), s. 13-17. ISSN 1210-2709. E-ISSN 1805-2363
Grant CEP: GA ČR(CZ) GA19-10246S
Institucionální podpora: RVO:61389021
Klíčová slova: microhardness * microstructure * lasma spraying * spark plasma sintering * NiCrAlY
Obor OECD: Materials engineering
Způsob publikování: Open access
https://ojs.cvut.cz/ojs/index.php/APP/article/view/6662/5719

NiCrAlY deposited by different thermal spraying methods is commonly used as thebond coat material in thermal barrier coatings (TBCs). In the present study, two experimentalcoatings were deposited by hybrid water stabilized plasma (WSP-H) and radio frequency inductivelycoupled plasma (RF-ICP) using the same feedstock powder. Spark plasma sintering (SPS) was used tomanufacture a compact NiCrAlY from the same feedstock powder as a reference material. Microstructure,internal oxidation, phase characterization and quantification of the mechanical behaviour in termsof microhardness were studied. The investigations clearly showed microstructural and mechanicaldifferences between the NiCrAlY samples manufactured by different plasma technologies. The resultsconfirmed that SPS and RF-ICP provide dense structures with no oxides due to the fabrication underprotective atmosphere and similar mechanical properties. Thus, RF-ICP may be used for deposition ofvery dense coatings with microstructure and hardness comparable to compacted materials prepared bySPS
Trvalý link: http://hdl.handle.net/11104/0315946