Local fracture toughness testing of sandstone based on X-ray tomographic reconstruction

0537395 - ÚTAM 2022 RIV GB eng J - Článek v odborném periodiku
Vavřík, Daniel - Beneš, Pavel - Fíla, Tomáš - Koudelka_ml., Petr - Kumpová, Ivana - Kytýř, Daniel - Vopálenský, Michal - Vavro, Martin - Vavro, Leona
Local fracture toughness testing of sandstone based on X-ray tomographic reconstruction.
International Journal of Rock Mechanics and Mining Sciences. Roč. 138, February (2021), č. článku 104578. ISSN 1365-1609. E-ISSN 1873-4545
Grant CEP: GA MŠMT(CZ) EF16_019/0000766
Institucionální podpora: RVO:68378297 ; RVO:68145535
Klíčová slova: local fracture toughness testing * crack path * quasi-brittle material * four-point bending test * direct tension testing * computed tomography * differential tomography
Obor OECD: Applied mechanics; Environmental and geological engineering, geotechnics (UGN-S)
Impakt faktor: 6.849, rok: 2021
Způsob publikování: Open access
https://doi.org/10.1016/j.ijrmms.2020.104578

It is well known that the measured values of the fracture toughness of rocks are influenced by material heterogeneity, dimensions, boundary conditions, and asymmetric mechanical behavior. Consequently, the results obtained by standard testing methods developed primarily for homogenous materials with symmetric mechanical behavior, can significantly differ. The standard methods take global approach. Thus, they suppose that the material tested will follow a specific physical model and that one can consider the selected testing method as a black box in which some simple characteristics are measured and the required values can be evaluated. If the material behavior is too different from the theoretically expected one, this global approach will fail. The authors present a method called Local Fracture Toughness Testing (LFTT) to overcome these obstacles. LFFT is calculated independently of the boundary conditions and the crack length. LFTT is based on a complex methodology using a series of tomographic reconstructions, for which data are recorded during specimen loading. Subsequent extended data processing using digital image correlation serves for calculating the evolution of the displacement/ strain fields and for identifying the crack which develops during increased loading. Later on, the crack tip opening displacement and the local fracture toughness KIC are calculated at arbitrarily selected positions independent of the geometry and boundary conditions. The LFTT methodology was tested on a sandstone specimen, since such material is usually considered to be brittle. In this work, the authors demonstrate that even a stable crack extension can be identified after maximal loading. Using a loading machine developed in-house, the experimental data allowed for the measurement of fracture toughness at five loading levels/crack lengths. In addition, fracture toughness was measured in nine planes crossing the crack tip for each loading level.

Trvalý link: http://hdl.handle.net/11104/0318756