Počet záznamů: 1
Microstructural characterization of dental zinc phosphate cements using combined small angle neutron scattering and microfocus X-ray computed tomography
- 1.0473535 - ÚTAM 2018 RIV GB eng J - Článek v odborném periodiku
Viani, Alberto - Sotiriadis, Konstantinos - Kumpová, Ivana - Mancini, L. - Appavou, M.-S.
Microstructural characterization of dental zinc phosphate cements using combined small angle neutron scattering and microfocus X-ray computed tomography.
Dental Materials. Roč. 33, č. 4 (2017), s. 402-417. ISSN 0109-5641. E-ISSN 1879-0097
Grant CEP: GA MŠMT(CZ) LO1219
Klíčová slova: zinc phosphate cements * small angle neutron scattering * X-ray micro-computed tomography * X-ray powder diffraction * zinc oxide * acid-base cements
Obor OECD: Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics
Impakt faktor: 4.039, rok: 2017
https://www.sciencedirect.com/science/article/pii/S0109564116305127
To characterize the microstructure of two zinc phosphate cement formulations in order to investigate the role of liquid/solid ratio and composition of powder component, on the developed porosity and, consequently, on compressive strength. Methods. X-ray powder diffraction with the Rietveld method was used to study the phase composition of zinc oxide powder and cements. Powder component and cement microstructure were investigated with scanning electron microscopy. Small angle neutron scattering (SANS) and microfocus X-ray computed tomography (XmCT) were together employed to characterize porosity and microstructure of dental cements. Compressive strength tests were performed to evaluate their mechanical performance. Results. The beneficial effects obtained by the addition of Al, Mg and B to modulate powder reactivity were mitigated by the crystallization of a Zn aluminate phase not involved in the cement setting reaction. Both cements showed spherical pores with a bimodal distribution at the micro/nano-scale. Pores, containing a low density gel-like phase, developed through segregation of liquid during setting. Increasing liquid/solid ratio from 0.378 to 0.571, increased both SANS and XmCT-derived specific surface area (by 56% and 22%, respectively), porosity (XmCT-derived porosity increased from 3.8% to 5.2%), the relative fraction of large pores >= 50 decreased compressive strength from 50 +/- 3 MPa to 39 +/- 3 MPa, and favored microstructural and compositional inhomogeneities. Significance. Explain aspects of powder design affecting the setting reaction and, in turn, cement performance, to help in optimizing cement formulation. The mechanism behind development of porosity and specific surface area explains mechanical performance, and processes such as erosion and fluoride release/uptake.
Trvalý link: http://hdl.handle.net/11104/0270718
Název souboru Staženo Velikost Komentář Verze Přístup 0473535_2017_Viani_et_al_Microstructural_characterization_of_dental_zincphosphate_cements.pdf 4 6.7 MB Autorský postprint povolen
Počet záznamů: 1