Creep in Al single crystal processed by equal-channel angular pressing

0367043 - ÚFM 2012 RIV RU eng A - Abstrakt
Král, Petr - Dvořák, Jiří - Šedá, Petra - Jäger, Aleš - Sklenička, Václav
Creep in Al single crystal processed by equal-channel angular pressing.
BNM-2011. -, č. 3 (2011), od 50-do 50
[Bulk nanostructured materials: from fundamentals to innovations BNM2011. 23.08.2011-26.08.2011, Ufa]
Grant CEP: GA AV ČR KAN300100801; GA ČR GPP108/10/P469
Výzkumný záměr: CEZ:AV0Z20410507; CEZ:AV0Z10100520
Klíčová slova: ultrafine-grained materials * creep behaviour * equal-channel angular pressing
Kód oboru RIV: JJ - Ostatní materiály

In this work the creep behaviour and microstructure changes in aluminium single crystal during equal-channel angular pressing (ECAP) were investigated in order to understand the relationships between ECAP microstructure and creep behaviour. The investigated crystal was oriented with {111} parallel to the shear plane and 110 was parallel to the direction of shear. During ECAP by route A at room temperature single-crystalline sample was subsequently transformed into the polycrystalline material. Microstructure of samples processed by 1 and 4 ECAP passes was characterized by transmission electron microscope (TEM) and scanning electron microscope (SEM) equipped with the electron backscatter diffraction unit (EBSD). Tensile creep tests at temperature of 373 K and at applied stress of 50 MPa were performed on the Al single crystal after one and four ECAP passes. It was found that the creep behaviour is influenced by cooperative grain boundary sliding along mesoscopic shear bands.
Trvalý link: http://hdl.handle.net/11104/0201835