0381676 - ÚGN 2013 RIV HR eng J - Článek v odborném periodiku
Zeleňák, M. - Valíček, Jan - Klich, Jiří - Židková, P.
Comparison of surface roughness quality created by abrasive water jet and CO2 laser beam cutting.
Technicki vjesnik - Technical Gazette. Roč. 19, č. 3 (2012), s. 481-485. ISSN 1330-3651. E-ISSN 1848-6339
Grant CEP: GA MŠMT ED2.1.00/03.0082
Institucionální podpora: RVO:68145535
Klíčová slova: abrasive waterjet cutting * CO2 laser beam cutting * optical profilometry * titanium sample
Kód oboru RIV: JQ - Strojní zařízení a nástroje
Impakt faktor: 0.601, rok: 2012
Web výsledku:
http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=129054

This paper deals with an evaluation of the surface roughness quality created by abrasive water jet and by CO2 laser, in terms of influence of the selected technological parameters on the final quality of machined surfaces. The main objective of these experimental studies was to consider the use of both technologies for cutting of difficult to cut materials. Experiments presented in the paper were carried out on titanium ASTM B265-99 samples. The machined surfaces of samples were measured by an optical profilometer. Subsequently, selected topographical characteristics were studied. The obtained data were used for comparison of surface roughness parameters Ra in different depths. Based on achieved results the comparison of both technologies was made.
Trvalý link: http://hdl.handle.net/11104/0212092