Počet záznamů: 1  

Characterization of LaFeO3 Dielectric Ceramics Produced by Spark Plasma Sintering

  1. 1.
    0585676 - ÚFP 2025 RIV CH eng J - Článek v odborném periodiku
    Ctibor, Pavel - Sedláček, J. - Illková, Ksenia - Straka, L.
    Characterization of LaFeO3 Dielectric Ceramics Produced by Spark Plasma Sintering.
    Materials. Roč. 17, č. 2 (2024), č. článku 287. E-ISSN 1996-1944
    Institucionální podpora: RVO:61389021
    Klíčová slova: dielectrics * LaFeO 3 * perovskite * photoconductivity * spark plasma sintering
    Obor OECD: Ceramics
    Impakt faktor: 3.4, rok: 2022
    Způsob publikování: Open access
    https://www.mdpi.com/1996-1944/17/2/287

    Commercially available LaFeO3 powder was processed using the spark plasma sintering (SPS) technique. The results of the dielectric measurement showed high permittivity, but this was strongly frequency-dependent and was also accompanied by a high loss tangent. The chemical purity of the powder and changes induced by the SPS process influenced the stability of the dielectric parameters of the bulk compacts. A microstructure with a homogeneous grain size and a certain porosity was produced. The microhardness of the sintered LaFeO3 was rather high, about 8.3 GPa. All the results are in reasonable agreement with the literature related to the production of LaFeO3 using different techniques. At frequencies as low as 100 Hz, the material behaved like a colossal permittivity ceramic, but this character was lost with the increasing frequency. On the other hand, it exhibited persistent DC photoconductivity after illumination with a standard bulb.
    Trvalý link: https://hdl.handle.net/11104/0353362

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.