Surface deformation recovery by thermal annealing of thermal plasma sprayed shape memory NiTi alloys

0576200 - FZÚ 2024 RIV CH eng J - Článek v odborném periodiku
Samal, Sneha Manjaree - Tomáštík, Jan - Čtvrtlík, Radim - Václavek, Lukáš - Molnárová, Orsolya - Šittner, Petr
Surface deformation recovery by thermal annealing of thermal plasma sprayed shape memory NiTi alloys.
Coatings. Roč. 13, č. 2 (2023), č. článku 433. E-ISSN 2079-6412
Grant CEP: GA ČR(CZ) GA22-20181S; GA MŠMT(CZ) EF16_019/0000760
Grant ostatní: OP VVV - SOLID21(XE) CZ.02.1.01/0.0/0.0/16_019/0000760
Institucionální podpora: RVO:68378271
Klíčová slova: spherical indentation * scratch test * wear * NiTi * thermal plasma spray * surface recovery * annealing
Obor OECD: Materials engineering
Impakt faktor: 3.4, rok: 2022
Způsob publikování: Open access

The shape memory effect is the most important attribute of shape memory alloys where material can recover to its initial shape after deformation by heating above its transformation temperature. In this article, the thermally induced recovery of well-defined microscopic deformation in a NiTi shape memory alloy was investigated. Surface deformation was performed by indenting the plasma sprayed NiTi shape memory alloy in a martensitic phase at room temperature using spherical indenters. In this article, a series of indentations, scratch lines and wear lines were made on the surface of two different NiTi shape memory alloys at the micrometre scale using two spherical indenters with different radii. Three-dimensional imaging of indentation topography using scanning confocal microscopy provided direct evidence of the thermally induced martensitic transformation of these plasma sprayed thick films allowing for partial recovery on the micro-scale.
Trvalý link: https://hdl.handle.net/11104/0345789