Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects

0572551 - ÚTAM 2024 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Rada, Václav - Fíla, Tomáš - Zlámal, Petr - Koudelka_ml., Petr - Šleichrt, Jan - Macháček, Michael - Vavřík, Daniel - Kytýř, Daniel
Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects.
Acta Polytechnica CTU Proceedings. Vol. 42. Prague: Czech Technical University in Prague, 2023 - (Kytýř, D.; Doktor, T.; Zlámal, P.), s. 72-76. E-ISSN 2336-5382.
[Youth Symposium on Experimental Solid Mechanics /18./. Telč (CZ), 11.06.2023-14.06.2023]
Grant CEP: GA ČR(CZ) GA22-13811S
Institucionální podpora: RVO:68378297
Klíčová slova: computed tomography * hardware trigger * harmonic motion * realtime synchronization
Obor OECD: Materials engineering
https://doi.org/10.14311/APP.2023.42.0072

In the contribution, we present a laboratory system capable of X-ray computed tomography (XCT) scanning of an periodically moving or oscillating object. The system is an in-house developed XCT setup with electromagnetic voice coil actuator mounted on top of the rotary stage of the setup. The strict synchronization of the components, the rotary stage, the electromagnetic actuator movement and the detector readout is accomplished with use of the detector hardware trigger and hard real-time Linux operating system. Cylindrical sample manufactured from epoxy resin with metal particles to enable movement tracking is scanned in a stationary position and during periodical movement induced by the vibration stage. The volumetric data of the scans is compared and the results of this contribution represent an important step towards identification of defects through modal analysis of in-situ harmonically vibrating object.
Trvalý link: https://hdl.handle.net/11104/0343924