Počet záznamů: 1
Prediction of the fatigue life of notched specimens: The influence of the surface quality produced by machining
- 1.0570454 - ÚFM 2025 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
Kozáková, Kamila - Klusák, Jan
Prediction of the fatigue life of notched specimens: The influence of the surface quality produced by machining.
Procedia Structural Integrity. Vol. 43. Amsterdam: Elsevier B. V., 2023 - (Pokluda, J.; Šandera, P.), s. 178-183. ISSN 2452-3216.
[MSMF10 - International Conference on Materials Structure and Micromechanics of Fracture /10./. Brno (CZ), 12.09.2022-14.09.2022]
Grant CEP: GA ČR(CZ) GA21-14886S
Institucionální podpora: RVO:68081723
Klíčová slova: notches * fatigue * lifetime predictions
Obor OECD: Materials engineering
The article introduces a method for fatigue lifetime predictions of notched specimens. The method uses fracture stresses of smooth and notched specimens with notch radius r = 0.2 mm. These two sets of experimental data are evaluated with the knowledge of axial stress distributions of the notched specimens using average stress over a length parameter l. This parameter l is considered to be a material characteristic (depending on the number of cycles to failure) and can be used for lifetime predictions of notched specimens with various notch radii. The predictions are compared to experimental data and analyzed. There is a strong influence of the process of machining of notches, which can lead to fatigue failure earlier than predicted. The data are evaluated in the area of high cycle fatigue and gigacycle fatigue.
Trvalý link: https://hdl.handle.net/11104/0344441
Počet záznamů: 1