Seismic performance of steel-PEC spliced frame beam

0561256 - ÚTAM 2023 RIV GB eng J - Článek v odborném periodiku
Yao, Y. - Huang, H. - Zhang, Wei - Ye, Y. - Xin, L. - Liu, Y.
Seismic performance of steel-PEC spliced frame beam.
Journal of Constructional Steel Research. Roč. 197, October (2022), č. článku 107456. ISSN 0143-974X. E-ISSN 1873-5983
Institucionální podpora: RVO:68378297
Klíčová slova: the steel-PEC spliced frame beam (SPSFB) * seismic behavior * flexural capacity * deformation
Obor OECD: Civil engineering
Impakt faktor: 4.1, rok: 2022
Způsob publikování: Omezený přístup
https://doi.org/10.1016/j.jcsr.2022.107456

In this paper we propose a novel form known as the steel-PEC spliced frame beam (SPSFB), which is intended to maintain the advantages of the PEC beam while reducing the consumption of steel. In the SPSFB, an independent H-beam (mid-portion beam) is replaced by the PEC beam with a thinner flange. The PEC and stub beams are connected by web bolts, a welded flange, and a girth welded flange cover plate to improve flexural capacity. Low cycle loading tests were conducted on five SPSFB specimens testing the variables of the concrete strength, the length of the stub beam, and the length of flange-plates. Two failure modes were observed, and the related seismic behavior was investigated. When the damage occurred at the bottom of the PEC beam, higher grade concrete was correlated with better seismic performance. When the damage occurred at the bottom of the stub beam, setting an appropriate length of stub beam and flange-plate can improve the hysteretic capacity and further reduce steel consumption. Based on elastic and plastic analysis, the bearing capacities and deformation were calculated. The calculated results agreed well with the experimental results.
Trvalý link: https://hdl.handle.net/11104/0333947