Počet záznamů: 1
Assessment of loading characteristics of resin grouted rock bolts under different confinement pressure through laboratory and numerical modelling studies
- 1.0557563 - ÚGN 2023 IN eng C - Konferenční příspěvek (zahraniční konf.)
Rajashekhar, K. - Ram, S. - Kumar, A. - Waclawik, Petr - Naresh, M.
Assessment of loading characteristics of resin grouted rock bolts under different confinement pressure through laboratory and numerical modelling studies.
Proceedings of the 9th Asian Mining Congress. Kolkata: The Mining, Geological & Metallurgical Institute of India (MGMI), 2022, s. 311-319.
[Asian Mining Congress and International Mining Exhibition (9.). Kolkata (IN), 04.04.2022-07.04.2022]
Institucionální podpora: RVO:68145535
Klíčová slova: rock bolts * numerical modelling * rock-resin
Obor OECD: Environmental and geological engineering, geotechnics
Rock bolts have become primary means of support system in Indian underground coal mines. Resin grouted, stiff and high capacity rock bolts support are being used in mechanised working. Application of resin grouted rock bolts is gradually increasing in Indian coalfields due excellent bonding between the interfaces of this reinforcement system of support. Confinement in immediate roof and side of pillar develops redistribution of in-situ horizontal stress and vertical stress respectively which leads to deformation with time. There are numbers of factors for the deformation but the level of induced stress driven deformation/spalling/fracturing depends on depth of cover and nature of overlying strata. Further, the load transfer to the bolt is dependent on the shear stress capable of being generated on the interfaces of the rock-resin and the bolt-resin through mechanical interlocking. Considering the abovementioned facts, investigations on efficacy of the rock bolt by varying the confining pressure at depth of cover 100-1000m is carried out on numerical models. Finite difference based numerical modelling using elastic constitutive model is considered for this study to evaluate the loading characteristics at varying depth of cover. Tension in the rock bolt found to be decreased with the depth of cover due to the influence of considerable inherent of confinement pressure. On the basis of observed loading characteristics of rock bolt in the models, an indigenous design for Short Encapsulation Pull-Out Tests (SEPTs) is also developed for detailed investigations in laboratory. Further, the numerical modelling provided significant information about roof sag, distribution of horizontal stress and its impact over rock bolt support.
Trvalý link: https://hdl.handle.net/11104/0336023
Název souboru Staženo Velikost Komentář Verze Přístup UGN_0557563.pdf 1 4.6 MB Jiná vyžádat
Počet záznamů: 1