An aerogel-based photocatalytic microreactor driven by light guiding for degradation of toxic pollutants

0549489 - ÚPT 2022 RIV NL eng J - Článek v odborném periodiku
Őzbakir, Y. - Jonáš, Alexandr - Kiraz, A. - Erkey, C.
An aerogel-based photocatalytic microreactor driven by light guiding for degradation of toxic pollutants.
Chemical Engineering Journal. Roč. 409, 1 April (2021), č. článku 128108. ISSN 1385-8947. E-ISSN 1873-3212
Institucionální podpora: RVO:68081731
Klíčová slova: Photocatalytic microreactors * Optofluidic waveguides * Total internal reflection * Nanoporous solid-air aerogels * Silica-titania composite aerogels * Photocatalytic degradation
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 16.744, rok: 2021
Způsob publikování: Open access
https://www.sciencedirect.com/science/article/pii/S1385894720342248?via%3Dihub

Efficient utilization of light in photocatalytic chemical processes requires careful optimization of the photocatalytic reactor layout to maximize the interaction between the incident light, photocatalyst and reactant molecules. Herein, we report a new type of photocatalytic flow microreactor with an integrated light guide, formed by a channel fabricated inside a hydrophobic composite aerogel monolith made of silica and titania (TiO2). The liquid-filled channel simultaneously acts as a reaction vessel and as a liquid-core optofluidic waveguide, distributing the incident light over the whole reaction volume. Anatase TiO2 nanoparticles embedded in the channel walls then serve as a photocatalyst that can efficiently interact with both the guided light and the reactant solution along the channel length. Composite aerogels were synthesized with TiO2 content between 1 and 50 wt %, retaining their interconnected mesoporous network, low refractive index, and waveguide propagation losses below3.9 dB/cm over this range of compositions. Using photocatalytic degradation of phenol an organic compound with harmful environmental effects as a model chemical reaction, the performance of the microreactor was systematically investigated. Reactant conversion was observed to increase with increasing incident light power, decreasing reactant flow rate and increasing mass fraction of TiO2 in the composite. An analytical model of the reactor/light guide system was developed that predicted successfully the scaling of the reactant conversion with the incident light power and reactant flow rate. The presented concept of aerogel-based optofluidic photocatalytic microreactors is readily scalable and possesses great potential for carrying out other photocatalytic reactions in both polar and non-polar solvents.
Trvalý link: http://hdl.handle.net/11104/0325483