Počet záznamů: 1
High-Resolution Analysis Using Bent Perfect Crystal in Powder Diffraction: Part II
- 1.0539686 - ÚJF 2021 RIV US eng J - Článek v odborném periodiku
Mikula, Pavol - Šaroun, Jan - Stammers, James H. - Em, V.
High-Resolution Analysis Using Bent Perfect Crystal in Powder Diffraction: Part II.
Journal of Surface Investigation-X-Ray Synchrotron and Neutron Techniques. Roč. 14, SUPPL 1 (2020), s. 151-155. ISSN 1027-4510
Grant CEP: GA MŠMT LM2015056; GA MŠMT LM2010011; GA MŠMT LM2015048
Výzkumná infrastruktura: Reactors LVR-15 and LR-0 II - 90120
Institucionální podpora: RVO:61389005
Klíčová slova: powder diffraction * focusing * bent crystal analyzer
Obor OECD: Condensed matter physics (including formerly solid state physics, supercond.)
Způsob publikování: Omezený přístup
https://doi.org/10.1134/S1027451020070332
As a continuation of our recent studies of alpha-Fe(211) samples at a scattering angle of 2 theta(S)= 88 degrees (Part I), a three-axis setup using bent perfect crystal monochromator and several analyzers was tested in the diffraction study of polycrystalline alpha-Fe(110) pins with a diameter of 8 and 2 mm at a scattering angle of 2 theta(S)= 47.1 degrees. After realizing the focusing conditions in real and momentum space at a neutron wavelength of 0.162 nm, a high angular resolution was achieved up to FWHM(Delta d/d) = 1.4 x 10(-3)and FWHM(Delta d/d) = 2.5 x 10(-3)for alpha-Fe samples with a diameter of 2 and 8 mm, respectively. This resolution was obtained by using open beams, i.e., without Soller collimators within the used range of the curvatures of the analyzers. Such settings can be used in powder diffraction, namely, in studies of high-resolution residual stresses and/or analysis of diffraction profiles with a small difference in the lattice parameters or a small change due to the application of an external load.
Trvalý link: http://hdl.handle.net/11104/0317397
Počet záznamů: 1