Preparation and Characterization of a Selective Polymer-Based Solar Absorber for Building Integration

0539042 - ÚVGZ 2021 RIV CH eng J - Článek v odborném periodiku
Čekon, M. - Struhala, K. - Kopkáně, Daniel
Preparation and Characterization of a Selective Polymer-Based Solar Absorber for Building Integration.
Applied Sciences-Basel. Roč. 10, č. 21 (2020), č. článku 7861. E-ISSN 2076-3417
Institucionální podpora: RVO:86652079
Klíčová slova: life-cycle assessment * tandem absorber * facade * technologies * performance * fabrication * efficiency * design * solar absorber * low emissivity * selective coating * polymers * life cycle assessment
Obor OECD: Energy and fuels
Impakt faktor: 2.679, rok: 2020
Způsob publikování: Open access
https://www.mdpi.com/2076-3417/10/21/7861

Recent technological advances in solar absorber production may have created opportunities for new applications of these materials in buildings. A low-emissivity enhanced polymer-based absorber foil was developed and prototyped to demonstrate feasibility of the concept. This paper describes key development factors leading to a particular composition of the prototype and its testing, specifically spectroscopy measurements (both for shortwave and longwave regions) and environmental impact assessment of its production. It also provides comparison of the tested parameters with commercially available absorbers. The results show that the developed absorber has relatively good thermal emissivity (approx. 0.3), high solar absorption (0.95) and selectivity (3.2), and significantly lower (up to 98%) environmental impacts compared to the commercially available metal-based solar selective absorbers
Trvalý link: http://hdl.handle.net/11104/0316798