Effect of periodic water clusters on AISI 304 welded surfaces

0537249 - ÚGN 2021 RIV CH eng J - Článek v odborném periodiku
Srivastava, M. - Nag, A. - Krejčí, L. - Petrů, J. - Chattopadhyaya, S. - Hloch, Sergej
Effect of periodic water clusters on AISI 304 welded surfaces.
Materials. Roč. 14, č. 1 (2021), č. článku 210. E-ISSN 1996-1944
Grant CEP: GA MŠMT(CZ) LO1406
Institucionální podpora: RVO:68145535
Klíčová slova: pulsating water jet * welded joints * stainless steel * residual stress * microhardness * surface roughness
Obor OECD: Mechanical engineering
Impakt faktor: 3.748, rok: 2021
Způsob publikování: Open access
https://www.mdpi.com/1996-1944/14/1/210/htm

This study compared the effect of the interaction time of periodic water clusters on the surface integrity of AISI 304 tungsten inert gas (TIG) welded joints at different excitation frequencies, as the effect of the technological parameters of pulsating water jet (PWJ) on the mechanical properties of TIG welded joints are under-researched. The TIG welded joints were subjected to different frequencies (20 and 40 kHz) and traverse speeds (1–4 mm/s) at a water pressure of 40 MPa and a standoff distance of 70 mm. The effect of the interaction of the pulsating jet on the material and the enhancement in its mechanical properties were compared through residual stress measurements, surface roughness, and sub-surface microhardness. A maximum enhancement in the residual stress values of up to 480 MPa was observed in the heat-affected zone, along with a maximum roughness of 6.03 µm and a maximum hardness of 551 HV using a frequency of 40 kHz. The improvement in the surface characteristics of the welded joints shows the potential of utilizing pulsed water jet technology with an appropriate selection of process parameters in the treatment of welded structures
Trvalý link: http://hdl.handle.net/11104/0314985